# Athom Plug v1 (before Jan 21, 2022)
#
# GPIO# Component
# GPIO0 None
# GPIO1 None
# GPIO2 None
# GPIO3 Button1
# GPIO4 BL0937 CF
# GPIO5 HLWBL CF1
# GPIO9 None
# GPIO10 None
# GPIO12 HLWBL SELi
# GPIO13 LedLink
# GPIO14 Relay1
# GPIO15 None
# GPIO16 None
# FLAG None

esp8266:
  board: esp8285
  restore_from_flash: true

binary_sensor:
  - platform: gpio
    pin:
      number: 3
      mode: INPUT_PULLUP
      inverted: true
    name: "${friendly_name} Power Button"
    disabled_by_default: true
    on_multi_click:
      - timing:
          - ON for at most 1s
          - OFF for at least 0.2s
        then:
          - switch.toggle: relay
      - timing:
          - ON for at least 4s
        then:
          - button.press: restart_button

sensor:
  - platform: hlw8012
    sel_pin:
      number: GPIO12
      inverted: true
    cf_pin: GPIO4
    cf1_pin: GPIO5
    voltage_divider: 780
    current:
      name: "${friendly_name} Current"
      filters:
        - calibrate_linear:
            - 0.0000 -> 0.0110 # Relay off no load
            - 0.0097 -> 0.0260 # Relay on no load
            - 0.9270 -> 0.7570
            - 2.0133 -> 1.6330
            - 2.9307 -> 2.3750
            - 5.4848 -> 4.4210
            - 8.4308 -> 6.8330
            - 9.9171 -> 7.9830
        # Normalize for plug load
        - lambda: if (x < 0.0260) return 0; else return (x - 0.0260);
    voltage:
      name: "${friendly_name} Voltage"

    power:
      name: "${friendly_name} Wattage"
      id: wattage
      unit_of_measurement: W
      filters:
        - calibrate_linear:
            - 0.0000 -> 0.5900 # Relay off no load
            - 0.0000 -> 1.5600 # Relay on no load
            - 198.5129 -> 87.8300
            - 434.2469 -> 189.5000
            - 628.6241 -> 273.9000
            - 1067.0067 -> 460.1000
            - 1619.8098 -> 699.2000
            - 2043.0282 -> 885.0000
        # Normalize for plug load
        - lambda: if (x < 1.5600) return 0; else return (x - 1.5600);
    energy:
      id: energy
      name: "${friendly_name} Energy Usage"
      unit_of_measurement: Wh
    change_mode_every: 1 # default 8
    update_interval: 5s

  - platform: total_daily_energy
    name: "${friendly_name} Total Daily Energy"
    power_id: wattage
    unit_of_measurement: kWh
    accuracy_decimals: 3
    filters:
      - multiply: 0.001

switch:
  - platform: gpio
    name: "${friendly_name}"
    pin: GPIO14
    id: relay
    restore_mode: RESTORE_DEFAULT_ON
    on_turn_on:
      - light.turn_on: blue_led

    on_turn_off:
      - light.turn_off: blue_led

light:
  - platform: status_led
    name: "${friendly_name} Status LED"
    id: blue_led
    disabled_by_default: true
    pin:
      inverted: true
      number: GPIO13