Add card reset steps, clean up formatting.
drduh
parent
59923197f7
commit
b745f1d90e
143
README.md
143
README.md
|
|
@ -37,7 +37,6 @@ If you have a comment or suggestion, please open an [Issue](https://github.com/d
|
|||
* [Copy public key](#copy-public-key)
|
||||
* [(Optional) Save public key for identity file configuration](#-optional--save-public-key-for-identity-file-configuration)
|
||||
* [Connect with public key authentication](#connect-with-public-key-authentication)
|
||||
* [Touch to authenticate](#touch-to-authenticate)
|
||||
* [Import SSH keys](#import-ssh-keys)
|
||||
* [Remote Machines (agent forwarding)](#remote-machines--agent-forwarding-)
|
||||
* [GitHub](#github)
|
||||
|
|
@ -47,9 +46,10 @@ If you have a comment or suggestion, please open an [Issue](https://github.com/d
|
|||
- [Prerequisites](#prerequisites)
|
||||
- [WSL configuration](#wsl-configuration)
|
||||
- [Remote host configuration](#remote-host-configuration)
|
||||
- [Final test](#final-test)
|
||||
- [Using multiple YubiKey with same GPG keys](#Using-multiple-YubiKey-with-same-GPG-keys)
|
||||
- [Multiple keys](#Multiple-keys)
|
||||
- [Require touch](#require-touch)
|
||||
- [Email](#email)
|
||||
- [Reset](#reset)
|
||||
- [Notes](#notes)
|
||||
- [Troubleshooting](#troubleshooting)
|
||||
- [Links](#links)
|
||||
|
|
@ -613,7 +613,11 @@ ssb rsa4096/0x5912A795E90DD2CF
|
|||
ssb rsa4096/0x3F29127E79649A3D
|
||||
created: 2017-10-09 expires: 2018-10-09 usage: A
|
||||
[ultimate] (1). Dr Duh <doc@duh.to>
|
||||
```
|
||||
|
||||
Finish by saving the keys.
|
||||
|
||||
```console
|
||||
gpg> save
|
||||
```
|
||||
|
||||
|
|
@ -635,7 +639,7 @@ ssb rsa4096/0x3F29127E79649A3D 2017-10-09 [A] [expires: 2018-10-09]
|
|||
|
||||
Add any additional identities or email addresses you wish to associate using the `adduid` command.
|
||||
|
||||
**Optional** Verify with OpenPGP key checks, use the automated [key best practice checker](https://riseup.net/en/security/message-security/openpgp/best-practices#openpgp-key-checks):
|
||||
**Tip** Verify with a OpenPGP [key best practice checker](https://riseup.net/en/security/message-security/openpgp/best-practices#openpgp-key-checks):
|
||||
|
||||
```console
|
||||
$ gpg --export $KEYID | hokey lint
|
||||
|
|
@ -669,6 +673,8 @@ $ gpg --armor --export-secret-subkeys $KEYID -o \path\to\dir\sub.gpg
|
|||
|
||||
Once GPG keys are moved to YubiKey, they cannot be moved again! Create an **encrypted** backup of the keyring and consider using a [paper copy](https://www.jabberwocky.com/software/paperkey/) of the keys as an additional backup.
|
||||
|
||||
**Tip**: The ext2 filesystem (without encryption) can be mounted on both Linux and OpenBSD.
|
||||
|
||||
**Linux**
|
||||
|
||||
Attach another external storage device and check its label:
|
||||
|
|
@ -1266,7 +1272,7 @@ gpg: Total number processed: 1
|
|||
gpg: imported: 1
|
||||
```
|
||||
|
||||
Edit the master key to assign it ultimate trust by selecting `trust` then option `5`:
|
||||
Edit the master key to assign it ultimate trust by selecting `trust` and `5`:
|
||||
|
||||
```console
|
||||
$ export KEYID=0xFF3E7D88647EBCDB
|
||||
|
|
@ -1470,16 +1476,18 @@ Probably the biggest thing missing from `gpg-agent`'s ssh agent support is being
|
|||
Create a hardened configuration for gpg-agent by downloading [drduh/config/gpg-agent.conf](https://github.com/drduh/config/blob/master/gpg-agent.conf):
|
||||
|
||||
```console
|
||||
$ curl -o ~/.gnupg/gpg-agent.conf https://raw.githubusercontent.com/drduh/config/master/gpg-agent.conf
|
||||
$ cd ~/.gnupg
|
||||
|
||||
$ cat ~/.gnupg/gpg-agent.conf
|
||||
$ wget https://raw.githubusercontent.com/drduh/config/master/gpg-agent.conf
|
||||
|
||||
$ grep -ve "^#" gpg-agent.conf
|
||||
enable-ssh-support
|
||||
default-cache-ttl 60
|
||||
max-cache-ttl 120
|
||||
pinentry-program /usr/bin/pinentry-curses
|
||||
```
|
||||
|
||||
Alternatively, you may want to use `/usr/bin/pinentry-gnome3` for a GUI-based prompt.
|
||||
**Tip** Set `pinentry-program /usr/bin/pinentry-gnome3` for a GUI-based prompt.
|
||||
|
||||
On macOS, use `brew install pinentry-mac` and adjust the program path to suit.
|
||||
|
||||
|
|
@ -1563,26 +1571,6 @@ debug1: Authentication succeeded (publickey).
|
|||
|
||||
**Note** To make multiple connections or securely transfer many files, consider using the [ControlMaster](https://en.wikibooks.org/wiki/OpenSSH/Cookbook/Multiplexing) ssh option. Also see [drduh/config/ssh_config](https://github.com/drduh/config/blob/master/ssh_config).
|
||||
|
||||
## Touch to authenticate
|
||||
|
||||
**Note** This is not possible on YubiKey NEO.
|
||||
|
||||
By default, YubiKey will perform key operations without requiring a touch from the user. To require a touch for every SSH authentication, use the [YubiKey Manager](https://developers.yubico.com/yubikey-manager/) and Admin PIN:
|
||||
|
||||
```console
|
||||
$ ykman openpgp touch aut on
|
||||
```
|
||||
|
||||
To require a touch for signing and encryption operations:
|
||||
|
||||
```console
|
||||
$ ykman openpgp touch sig on
|
||||
|
||||
$ ykman openpgp touch enc on
|
||||
```
|
||||
|
||||
The YubiKey will blink when it's waiting for touch.
|
||||
|
||||
## Import SSH keys
|
||||
|
||||
If there are existing SSH keys that you wish to make available via `gpg-agent`, you'll need to import them. You should then remove the original private keys. When importing the key, `gpg-agent` uses the key's filename as the key's label; this makes it easier to follow where the key originated from. In this example, we're starting with just the YubiKey's key in place and importing `~/.ssh/id_rsa`:
|
||||
|
|
@ -1785,25 +1773,24 @@ StreamLocalBindUnlink yes
|
|||
|
||||
And reload the SSH daemon (e.g., `sudo service sshd reload`).
|
||||
|
||||
#### Final test
|
||||
Unplug YubiKey, disconnect or reboot. Log back in to Windows, open a WSL console and enter `ssh-add -l` - you should see nothing.
|
||||
|
||||
- Unplug YubiKey, disconnect or reboot.
|
||||
- Log back in to Windows, open a WSL console and enter `ssh-add -l` - you should see nothing.
|
||||
- Plug in YubiKey, enter the same command to display the ssh key.
|
||||
- Log in to the remote host, you should have the pinentry dialog asking for the YubiKey pin.
|
||||
- On the remote host, type `ssh-add -l` - if you see the ssh key, that means forwarding works!
|
||||
Plug in YubiKey, enter the same command to display the ssh key.
|
||||
|
||||
Log in to the remote host, you should have the pinentry dialog asking for the YubiKey pin.
|
||||
|
||||
On the remote host, type `ssh-add -l` - if you see the ssh key, that means forwarding works!
|
||||
|
||||
**Note** Agent forwarding may be chained through multiple hosts - just follow the same [protocol](#remote-host-configuration) to configure each host.
|
||||
|
||||
# Using multiple YubiKey with same GPG keys
|
||||
# multiple keys
|
||||
|
||||
If you want to store your keys on multiple YubiKey, you will see that GnuPG doesn't store the serial number of the first key it has seen.
|
||||
This is a know issue [#T2291](https://dev.gnupg.org/T2291). For now if you lost one of your keys and want to use another one the only workaround
|
||||
is to delete GnuPG's shadowed key (this is where the serial number is stored).
|
||||
GnuPG doesn't store the serial number of the first key it has seen - [#T2291](https://dev.gnupg.org/T2291).
|
||||
|
||||
To do so, first of all you need to find the `Keygrip` number of each key :
|
||||
```
|
||||
gpg2 --with-keygrip -k $KEYID
|
||||
If a YubiKey is lost and replaced, delete GnuPG's shadowed key - where the serial number is stored. Find the `Keygrip` number of each key:
|
||||
|
||||
```console
|
||||
$ gpg --with-keygrip -k $KEYID
|
||||
pub rsa4096/0xFF3E7D88647EBCDB 2017-10-09 [C]
|
||||
Key fingerprint = 011C E16B D45B 27A5 5BA8 776D FF3E 7D88 647E BCDB
|
||||
Keygrip = 7A20855980A62C10569DE893157F38A696B1300E
|
||||
|
|
@ -1816,25 +1803,77 @@ sub rsa4096/0x3F29127E79649A3D 2017-10-09 [A] [expires: 2018-10-09]
|
|||
Keygrip = 7EF25A1115294342F451BC1CDD0FA94395F2D074
|
||||
```
|
||||
|
||||
Then delete all the shadow keys using their `Keygrip` number :
|
||||
```
|
||||
cd .gnupg/private-keys-v1.d
|
||||
rm 85D44BD52AD45C0852BD15BF41161EE9AE477398.key \
|
||||
A0AA3D9F626BDEA3B833F290C7BCA79216C8A996.key \
|
||||
7EF25A1115294342F451BC1CDD0FA94395F2D074.key
|
||||
Then delete all the shadow keys using their `Keygrip` number:
|
||||
|
||||
```console
|
||||
$ cd .gnupg/private-keys-v1.d
|
||||
|
||||
$ rm 85D44BD52AD45C0852BD15BF41161EE9AE477398.key \
|
||||
A0AA3D9F626BDEA3B833F290C7BCA79216C8A996.key \
|
||||
7EF25A1115294342F451BC1CDD0FA94395F2D074.key
|
||||
```
|
||||
|
||||
Insert the new YubiKey simply run a card-status this will re-generate the shadow-keys :
|
||||
```
|
||||
gpg2 --card-status
|
||||
Insert the new YubiKey and re-generate shadow-keys by checking card status:
|
||||
|
||||
```console
|
||||
$ gpg --card-status
|
||||
```
|
||||
|
||||
Then try to use your key, it should work, without serial number error.
|
||||
# Require touch
|
||||
|
||||
**Note** This is not possible on YubiKey NEO.
|
||||
|
||||
By default, YubiKey will perform encryption, signing and authentication operations without requiring any action from the user, after the key is plugged in and first unlocked with the PIN.
|
||||
|
||||
To require a touch for each key operation, install [YubiKey Manager](https://developers.yubico.com/yubikey-manager/) and recall the Admin PIN:
|
||||
|
||||
Authentication:
|
||||
|
||||
```console
|
||||
$ ykman openpgp touch aut on
|
||||
```
|
||||
|
||||
Signing:
|
||||
|
||||
```console
|
||||
$ ykman openpgp touch sig on
|
||||
```
|
||||
|
||||
Encryption:
|
||||
|
||||
```console
|
||||
$ ykman openpgp touch enc on
|
||||
```
|
||||
|
||||
YubiKey will blink when it is waiting for a touch.
|
||||
|
||||
|
||||
# Email
|
||||
|
||||
GPG keys on YubiKey can be used with ease to encrypt or sign email messages and attachments using [Thunderbird](https://www.thunderbird.net/) and [Enigmail](https://www.enigmail.net). Thunderbird supports OAuth 2 authentication and can be used with Gmail. See [this guide](https://ssd.eff.org/en/module/how-use-pgp-linux) from EFF for detailed instructions.
|
||||
|
||||
# Reset
|
||||
|
||||
If PIN attempts are exceeded, the card is locked and must be [reset](https://developers.yubico.com/ykneo-openpgp/ResetApplet.html) and set up again using the encrypted backup.
|
||||
|
||||
Copy the following script to a file and run `gpg-connect-agent -R $file` to lock and terminate the card. Then re-insert YubiKey to reset.
|
||||
|
||||
```console
|
||||
/hex
|
||||
scd serialno
|
||||
scd apdu 00 20 00 81 08 40 40 40 40 40 40 40 40
|
||||
scd apdu 00 20 00 81 08 40 40 40 40 40 40 40 40
|
||||
scd apdu 00 20 00 81 08 40 40 40 40 40 40 40 40
|
||||
scd apdu 00 20 00 81 08 40 40 40 40 40 40 40 40
|
||||
scd apdu 00 20 00 83 08 40 40 40 40 40 40 40 40
|
||||
scd apdu 00 20 00 83 08 40 40 40 40 40 40 40 40
|
||||
scd apdu 00 20 00 83 08 40 40 40 40 40 40 40 40
|
||||
scd apdu 00 20 00 83 08 40 40 40 40 40 40 40 40
|
||||
scd apdu 00 e6 00 00
|
||||
scd apdu 00 44 00 00
|
||||
/echo Card has been successfully reset.
|
||||
```
|
||||
|
||||
# Notes
|
||||
|
||||
1. YubiKey has two configurations: one invoked with a short press, and the other with a long press. By default, the short-press mode is configured for HID OTP - a brief touch will emit an OTP string starting with `cccccccc`. If you rarely use the OTP mode, you can swap it to the second configuration via the YubiKey Personalization tool. If you *never* use OTP, you can disable it entirely using the [YubiKey Manager](https://developers.yubico.com/yubikey-manager) application (note, this not the similarly named YubiKey NEO Manager).
|
||||
|
|
@ -1870,8 +1909,6 @@ GPG keys on YubiKey can be used with ease to encrypt or sign email messages and
|
|||
|
||||
- If SSH authentication stil fails - add up to 3 `-v` flags to increase verbosity.
|
||||
|
||||
- If you totally screw up, you can [reset the card](https://developers.yubico.com/ykneo-openpgp/ResetApplet.html).
|
||||
|
||||
# Links
|
||||
|
||||
* https://alexcabal.com/creating-the-perfect-gpg-keypair/
|
||||
|
|
|
|||
Loading…
Reference in New Issue