This is a guide to using [YubiKey](https://www.yubico.com/products/identifying-your-yubikey/) as a [smart card](https://security.stackexchange.com/questions/38924/how-does-storing-gpg-ssh-private-keys-on-smart-cards-compare-to-plain-usb-drives) for secure encryption, signature and authentication operations. Keys stored on YubiKey are [non-exportable](https://web.archive.org/web/20201125172759/https://support.yubico.com/hc/en-us/articles/360016614880-Can-I-Duplicate-or-Back-Up-a-YubiKey-), unlike filesystem-based credentials, while remaining convenient for daily use. YubiKey can be configured to require a physical touch for cryptographic operations, reducing the risk of credential compromise. To suggest an improvement, send a pull request or open an [issue](https://github.com/drduh/YubiKey-Guide/issues). - [Purchase YubiKey](#purchase-yubikey) - [Prepare environment](#prepare-environment) - [Install software](#install-software) - [Prepare GnuPG](#prepare-gnupg) * [Configuration](#configuration) * [Identity](#identity) * [Key](#key) * [Expiration](#expiration) * [Passphrase](#passphrase) - [Create Certify key](#create-certify-key) - [Create Subkeys](#create-subkeys) - [Verify keys](#verify-keys) - [Backup keys](#backup-keys) - [Export public key](#export-public-key) - [Configure YubiKey](#configure-yubikey) * [Change PIN](#change-pin) * [Set attributes](#set-attributes) - [Transfer Subkeys](#transfer-subkeys) * [Signature key](#signature-key) * [Encryption key](#encryption-key) * [Authentication key](#authentication-key) - [Verify transfer](#verify-transfer) - [Finish setup](#finish-setup) - [Using YubiKey](#using-yubikey) * [Encryption](#encryption) * [Signature](#signature) * [Configure touch](#configure-touch) * [SSH](#ssh) + [Replace agents](#replace-agents) + [Copy public key](#copy-public-key) + [Import SSH keys](#import-ssh-keys) + [SSH agent forwarding](#ssh-agent-forwarding) - [Use ssh-agent](#use-ssh-agent) - [Use S.gpg-agent.ssh](#use-sgpg-agentssh) - [Chained forwarding](#chained-forwarding) * [GitHub](#github) * [GnuPG agent forwarding](#gnupg-agent-forwarding) + [Legacy distributions](#legacy-distributions) + [Chained GnuPG agent forwarding](#chained-gnupg-agent-forwarding) * [Using multiple YubiKeys](#using-multiple-yubikeys) * [Email](#email) + [Thunderbird](#thunderbird) + [Mailvelope](#mailvelope) + [Mutt](#mutt) * [Keyserver](#keyserver) - [Updating keys](#updating-keys) * [Renew Subkeys](#renew-subkeys) * [Rotate Subkeys](#rotate-subkeys) - [Reset YubiKey](#reset-yubikey) - [Optional hardening](#optional-hardening) * [Improving entropy](#improving-entropy) * [Enable KDF](#enable-kdf) * [Network considerations](#network-considerations) - [Notes](#notes) - [Troubleshooting](#troubleshooting) - [Alternative solutions](#alternative-solutions) - [Additional resources](#additional-resources) # Purchase YubiKey [Current YubiKeys](https://www.yubico.com/store/compare/) except the FIDO-only Security Key Series and Bio Series YubiKeys are compatible with this guide. [Verify YubiKey](https://support.yubico.com/hc/en-us/articles/360013723419-How-to-Confirm-Your-Yubico-Device-is-Genuine) by visiting [yubico.com/genuine](https://www.yubico.com/genuine/). Select *Verify Device* to begin the process. Touch the YubiKey when prompted and allow the site to see the make and model of the device when prompted. This device attestation may help mitigate [supply chain attacks](https://media.defcon.org/DEF%20CON%2025/DEF%20CON%2025%20presentations/DEF%20CON%2025%20-%20r00killah-and-securelyfitz-Secure-Tokin-and-Doobiekeys.pdf). Several portable storage devices (such as microSD cards) for storing encrypted backups are also recommended. # Prepare environment A dedicated, secure operating environment is recommended to generate cryptographic keys. The following is a general ranking of environments least to most hospitable to generating materials: 1. Public, shared or other computer owned by someone else 1. Daily-use personal operating system with unrestricted network access 1. Virtualized operating system with limited capabilities (using [virt-manager](https://virt-manager.org/), VirtualBox or VMware, for example) 1. Dedicated and hardened [Debian](https://www.debian.org/) or [OpenBSD](https://www.openbsd.org/) installation 1. Ephemeral [Debian Live](https://www.debian.org/CD/live/) or [Tails](https://tails.boum.org/index.en.html) booted without primary storage attached 1. Hardened hardware and firmware ([Coreboot](https://www.coreboot.org/), [Intel ME removed](https://github.com/corna/me_cleaner)) 1. Air-gapped system without network capabilities, preferably ARM-based Raspberry Pi or other architecturally diverse equivalent Debian Live is used in this guide to balance usability and security, with some additional instructions for OpenBSD. Download the latest image and signature files: ```console curl -fLO "https://cdimage.debian.org/debian-cd/current-live/amd64/iso-hybrid/SHA512SUMS" curl -fLO "https://cdimage.debian.org/debian-cd/current-live/amd64/iso-hybrid/SHA512SUMS.sign" curl -fLO "https://cdimage.debian.org/debian-cd/current-live/amd64/iso-hybrid/$(awk '/xfce.iso$/ {print $2}' SHA512SUMS)" ``` Download the Debian signing public key: ```console gpg --keyserver hkps://keyring.debian.org --recv DF9B9C49EAA9298432589D76DA87E80D6294BE9B ``` If the public key cannot be received, use a different keyserver or DNS server: ```console gpg --keyserver hkps://keyserver.ubuntu.com:443 --recv DF9B9C49EAA9298432589D76DA87E80D6294BE9B ``` Verify the signature: ```console gpg --verify SHA512SUMS.sign SHA512SUMS ``` `gpg: Good signature from "Debian CD signing key "` must appear in the output. Verify the cryptographic hash of the image file matches the one in the signed file: ```console grep $(sha512sum debian-live-*-amd64-xfce.iso) SHA512SUMS ``` See [Verifying authenticity of Debian CDs](https://www.debian.org/CD/verify) for more information. Connect a portable storage device and identify the disk label - this guide uses `/dev/sdc` throughout, but this value may differ on your system: **Linux** ```console $ sudo dmesg | tail usb-storage 3-2:1.0: USB Mass Storage device detected sd 2:0:0:0: [sdc] Attached SCSI removable disk ``` Copy the Debian image to the device: ```console sudo dd if=debian-live-*-amd64-xfce.iso of=/dev/sdc bs=4M status=progress ; sync ``` **OpenBSD** ```console $ dmesg | tail -n2 sd2 at scsibus4 targ 1 lun 0: SCSI4 0/direct removable serial.0000000000000 sd2: 15193MB, 512 bytes/sector, 31116288 sectors $ doas dd if=debian-live-*-amd64-xfce.iso of=/dev/rsd2c bs=4m 465+1 records in 465+1 records out 1951432704 bytes transferred in 139.125 secs (14026448 bytes/sec) ``` Power off, remove internal hard drives and all unnecessary devices, such as the wireless card. # Install software Load the operating system and configure networking. Optional hardening steps related to networking can be found [below](#network-considerations). **Note** If the screen locks on Debian Live, unlock with `user` / `live` Open terminal and install required software packages. **Debian/Ubuntu** ```console sudo apt update sudo apt -y upgrade sudo apt -y install \ wget gnupg2 gnupg-agent dirmngr \ cryptsetup scdaemon pcscd \ yubikey-personalization yubikey-manager ``` **OpenBSD** ```console doas pkg_add gnupg pcsc-tools ``` **macOS** Download and install [Homebrew](https://brew.sh/) and the following packages: ```console brew install \ gnupg yubikey-personalization ykman pinentry-mac wget ``` **Note** An additional Python package dependency may need to be installed to use [`ykman`](https://support.yubico.com/support/solutions/articles/15000012643-yubikey-manager-cli-ykman-user-guide) - `pip install yubikey-manager` **NixOS** Build an air-gapped NixOS LiveCD image: ```console ref=$(git ls-remote https://github.com/drduh/Yubikey-Guide refs/heads/master | awk '{print $1}') nix build --experimental-features "nix-command flakes" \ github:drduh/YubiKey-Guide/$ref#nixosConfigurations.yubikeyLive.x86_64-linux.config.system.build.isoImage ``` If you have this repository checked out: Recommended, but optional: update `nixpkgs` and `drduh/config`: ```console nix flake update --commit-lock-file ``` Build the image: ```console nix build --experimental-features "nix-command flakes" .#nixosConfigurations.yubikeyLive.x86_64-linux.config.system.build.isoImage ``` Copy it to a USB drive: ```console sudo cp -v result/iso/yubikeyLive.iso /dev/sdc ; sync ``` Skip steps to create a temporary working directory and a hardened configuration, as they are already part of the image. If you want to test your build before copying it into a USB stick, you can try it out on your machine using a tool like QEMU. Please keep in mind that a virtualized environment does not provide the same amount of security as an ephemeral system (see *Prepare environment* above). Here is an example QEMU invocation after placing `yubikeyLive` in `result/iso` using the above `nix build` command: ```console # Launch with 4G memory, 2 CPUs and KVM enabled qemu-system-x86_64 \ -enable-kvm \ -m 4G \ -smp 2 \ -drive readonly=on,media=cdrom,format=raw,file=result/iso/yubikeyLive.iso ``` **Arch** ```console sudo pacman -Syu gnupg pcsclite ccid yubikey-personalization ``` **RHEL7** ```console sudo yum install -y gnupg2 pinentry-curses pcsc-lite pcsc-lite-libs gnupg2-smime ``` **Fedora** ```console sudo dnf install wget wget https://github.com/rpmsphere/noarch/raw/master/r/rpmsphere-release-38-1.noarch.rpm sudo rpm -Uvh rpmsphere-release*rpm sudo dnf install \ gnupg2 dirmngr cryptsetup gnupg2-smime \ pcsc-tools opensc pcsc-lite secure-delete \ pgp-tools yubikey-personalization-gui ``` # Prepare GnuPG Create a temporary directory which will be cleared on [reboot](https://en.wikipedia.org/wiki/Tmpfs) and set it as the GnuPG directory: ```console export GNUPGHOME=$(mktemp -d -t gnupg-$(date +%Y-%m-%d)-XXXXXXXXXX) ``` ## Configuration Import or create a [hardened configuration](https://github.com/drduh/config/blob/master/gpg.conf): ```console cd $GNUPGHOME wget https://raw.githubusercontent.com/drduh/config/master/gpg.conf ``` The options will look similar to: ```console $ grep -ve "^#" $GNUPGHOME/gpg.conf personal-cipher-preferences AES256 AES192 AES personal-digest-preferences SHA512 SHA384 SHA256 personal-compress-preferences ZLIB BZIP2 ZIP Uncompressed default-preference-list SHA512 SHA384 SHA256 AES256 AES192 AES ZLIB BZIP2 ZIP Uncompressed cert-digest-algo SHA512 s2k-digest-algo SHA512 s2k-cipher-algo AES256 charset utf-8 no-comments no-emit-version no-greeting keyid-format 0xlong list-options show-uid-validity verify-options show-uid-validity with-fingerprint require-cross-certification no-symkey-cache armor use-agent throw-keyids ``` **Note** Networking can be disabled for the remainder of the setup. ## Identity When creating an identity with GnuPG, the default options ask for a "Real name", "Email address" and optional "Comment". Depending on how you plan to use GnuPG, set these values respectively: ```console export IDENTITY="YubiKey User " ``` Or use any attribute which will uniquely identity the key (this may be incompatible with certain use cases): ```console export IDENTITY="My Cool YubiKey - 2024" ``` ## Key Select the desired algorithm and key size. This guide recommends 4096-bit RSA. Set the value: ```console export KEY_TYPE=rsa4096 ``` ## Expiration Determine the desired Subkey validity duration. Setting a Subkey expiry forces identity and credential lifecycle management. However, setting an expiry on the Certify key is pointless, because it can just be used to extend itself. [Revocation certificates](https://security.stackexchange.com/questions/14718/does-openpgp-key-expiration-add-to-security/79386#79386) should instead be used to revoke an identity. This guide recommends a two year expiration for Subkeys to balance security and usability, however longer durations are possible to reduce maintenance frequency. When Subkeys expire, they may still be used to decrypt with GnuPG and authenticate with SSH, however they can **not** be used to encrypt nor sign new messages. Subkeys must be renewed or rotated using the Certify key - see [Updating keys](#updating-keys). Set the expiration date to two years: ```console export EXPIRATION=2y ``` Or set the expiration date to a specific date to schedule maintenance: ```console export EXPIRATION=2026-05-01 ``` ## Passphrase Generate a passphrase for the Certify key. It will be used infrequently to manage Subkeys and should be very strong. The passphrase is recommended to consist of only uppercase letters and numbers for improved readability. [Diceware](https://secure.research.vt.edu/diceware) is another method for creating memorable passphrases. The following commands will generate a strong passphrase and avoid ambiguous characters: ```console export CERTIFY_PASS=$(LC_ALL=C tr -dc 'A-Z1-9' < /dev/urandom | \ tr -d "1IOS5U" | fold -w 30 | sed "-es/./ /"{1..26..5} | \ cut -c2- | tr " " "-" | head -1) ; printf "\n$CERTIFY_PASS\n\n" ``` Write the passphrase in a secure location, ideally separate from the portable storage device used for key material, or memorize it. This repository includes a [`passphrase.html`](https://raw.githubusercontent.com/drduh/YubiKey-Guide/master/passphrase.html) template to help with credential transcription. Save the raw file, open it with a browser and print. Use a pen or permanent marker to select a letter or number on each row for each character in the passphrase. [`passphrase.csv`](https://raw.githubusercontent.com/drduh/YubiKey-Guide/master/passphrase.csv) can also be printed without a browser: ```console lp -d Printer-Name passphrase.csv ``` # Create Certify key The primary key to generate is the Certify key, which is responsible for issuing Subkeys for encryption, signature and authentication operations. The Certify key should be kept offline at all times and only accessed from a dedicated and secure environment to issue or revoke Subkeys. Do not set an expiration date on the Certify key. Generate the Certify key: ```console gpg --batch --passphrase "$CERTIFY_PASS" \ --quick-generate-key "$IDENTITY" "$KEY_TYPE" cert never ``` Set and view the Certify key identifier and fingerprint for use later: ```console export KEYID=$(gpg -k --with-colons "$IDENTITY" | awk -F: '/^pub:/ { print $5; exit }') export KEYFP=$(gpg -k --with-colons "$IDENTITY" | awk -F: '/^fpr:/ { print $10; exit }') printf "\nKey ID: %40s\nKey FP: %40s\n\n" "$KEYID" "$KEYFP" ``` # Create Subkeys Use the following command to generate Signature, Encryption and Authentication Subkeys using the previously configured key type, passphrase and expiration: ```console for SUBKEY in sign encrypt auth ; do \ gpg --batch --pinentry-mode=loopback --passphrase "$CERTIFY_PASS" \ --quick-add-key "$KEYFP" "$KEY_TYPE" "$SUBKEY" "$EXPIRATION" done ``` # Verify keys List available secret keys: ```console gpg -K ``` The output will display **[C]ertify, [S]ignature, [E]ncryption and [A]uthentication** keys: ```console sec rsa4096/0xF0F2CFEB04341FB5 2024-01-01 [C] Key fingerprint = 4E2C 1FA3 372C BA96 A06A C34A F0F2 CFEB 0434 1FB5 uid [ultimate] YubiKey User ssb rsa4096/0xB3CD10E502E19637 2024-01-01 [S] [expires: 2026-05-01] ssb rsa4096/0x30CBE8C4B085B9F7 2024-01-01 [E] [expires: 2026-05-01] ssb rsa4096/0xAD9E24E1B8CB9600 2024-01-01 [A] [expires: 2026-05-01] ``` # Backup keys Save a copy of the Certify key, Subkeys and public key: ```console gpg --output $GNUPGHOME/$KEYID-Certify.key \ --batch --pinentry-mode=loopback --passphrase "$CERTIFY_PASS" \ --armor --export-secret-keys $KEYID gpg --output $GNUPGHOME/$KEYID-Subkeys.key \ --batch --pinentry-mode=loopback --passphrase "$CERTIFY_PASS" \ --armor --export-secret-subkeys $KEYID gpg --output $GNUPGHOME/$KEYID-$(date +%F).asc \ --armor --export $KEYID ``` Create an **encrypted** backup on portable storage to be kept offline in a secure and durable location. The following process is recommended to be repeated several times on multiple portable storage devices, as they are likely to fail over time. As an additional backup measure, [Paperkey](https://www.jabberwocky.com/software/paperkey/) can be used to make a physical copy of key materials for improved durability. **Tip** The [ext2](https://en.wikipedia.org/wiki/Ext2) filesystem without encryption can be mounted on Linux and OpenBSD. Use [FAT32](https://en.wikipedia.org/wiki/Fat32) or [NTFS](https://en.wikipedia.org/wiki/Ntfs) filesystem for macOS and Windows compatibility instead. **Linux** Attach a portable storage device and check its label, in this case `/dev/sdc`: ```console $ sudo dmesg | tail usb-storage 3-2:1.0: USB Mass Storage device detected sd 2:0:0:0: [sdc] Attached SCSI removable disk $ sudo fdisk -l /dev/sdc Disk /dev/sdc: 14.9 GiB, 15931539456 bytes, 31116288 sectors ``` **Warning** Confirm the destination (`of`) before issuing the following command - it is destructive! This guide uses `/dev/sdc` throughout, but this value may be different on your system. Zero the header to prepare for encryption: ```console sudo dd if=/dev/zero of=/dev/sdc bs=4M count=1 ``` Remove and re-connect the storage device. Erase and create a new partition table: ```console sudo fdisk /dev/sdc < SCSI4 0/direct removable serial.00000000000000000000 ``` Print the existing partitions to make sure it's the right device: ```console doas disklabel -h sd2 ``` Initialize the disk by creating an `a` partition with FS type `RAID` and size of 25 Megabytes: ```console $ doas fdisk -giy sd2 Writing MBR at offset 0. Writing GPT. $ doas disklabel -E sd2 Label editor (enter '?' for help at any prompt) sd2> a a offset: [64] size: [31101776] 25M FS type: [4.2BSD] RAID sd2*> w sd2> q No label changes ``` Encrypt with bioctl using a unique [Passphrase](#passphrase): ```console $ doas bioctl -c C -l sd2a softraid0 New passphrase: Re-type passphrase: softraid0: CRYPTO volume attached as sd3 ``` Create an `i` partition on the new crypto volume and the filesystem: ```console $ doas fdisk -giy sd3 Writing MBR at offset 0. Writing GPT. $ doas disklabel -E sd3 Label editor (enter '?' for help at any prompt) sd3> a i offset: [64] size: [16001] FS type: [4.2BSD] sd3*> w sd3> q No label changes. $ doas newfs sd3i ``` Mount the filesystem and copy the temporary directory with the keyring: ```console doas mkdir /mnt/encrypted-storage doas mount /dev/sd3i /mnt/encrypted-storage doas cp -av $GNUPGHOME /mnt/encrypted-storage ``` Unmount and remove the encrypted volume: ```console doas umount /mnt/encrypted-storage doas bioctl -d sd3 ``` See [OpenBSD FAQ#14](https://www.openbsd.org/faq/faq14.html#softraidCrypto) for more information. # Export public key **Important** Without the public key, it will **not** be possible to use GnuPG to decrypt nor sign messages. However, YubiKey can still be used for SSH authentication. Connect another portable storage device or create a new partition on the existing one. **Linux** Using the same `/dev/sdc` device as in the previous step, create a small (at least 20 Mb is recommended) partition for storing materials: ```console sudo fdisk /dev/sdc < a b offset: [32130] size: [31069710] 25M FS type: [swap] 4.2BSD sd2*> w sd2> q No label changes. ``` Create a filesystem and export the public key to it: ```console doas newfs sd2b doas mkdir /mnt/public doas mount /dev/sd2b /mnt/public gpg --armor --export $KEYID | doas tee /mnt/public/$KEYID-$(date +%F).asc ``` Unmount and remove the storage device: ```console doas umount /mnt/public ``` # Configure YubiKey Connect YubiKey and confirm its status: ```console gpg --card-status ``` If the card is locked, [Reset](#reset-yubikey) it. ## Change PIN YubiKey's [PGP](https://developers.yubico.com/PGP/) interface has its own PINs separate from other modules such as [PIV](https://developers.yubico.com/PIV/Introduction/YubiKey_and_PIV.html): Name | Default value | Capability -----------|---------------|------------------------------------------------------------- User PIN | `123456` | cryptographic operations (decrypt, sign, authenticate) Admin PIN | `12345678` | reset PIN, change Reset Code, add keys and owner information Reset Code | None | reset PIN ([more information](https://forum.yubico.com/viewtopicd01c.html?p=9055#p9055)) Determine the desired PIN values. They can be shorter than the Certify key passphrase due to limited brute-forcing opportunities; the User PIN should be convenient enough to remember for every-day use. The *User PIN* must be at least 6 characters and the *Admin PIN* must be at least 8 characters. A maximum of 127 ASCII characters are allowed. See [GnuPG - Managing PINs](https://www.gnupg.org/howtos/card-howto/en/ch03s02.html) for more information. Set PINs manually or generate them, for example a 6 digit User PIN and 8 digit Admin PIN: ```console export ADMIN_PIN=$(LC_ALL=C tr -dc '0-9' < /dev/urandom | fold -w8 | head -1) export USER_PIN=$(LC_ALL=C tr -dc '0-9' < /dev/urandom | fold -w6 | head -1) printf "\nAdmin PIN: %12s\nUser PIN: %13s\n\n" "$ADMIN_PIN" "$USER_PIN" ``` Change the Admin PIN: ```console gpg --command-fd=0 --pinentry-mode=loopback --change-pin <`, for example: ```console sec rsa4096/0xF0F2CFEB04341FB5 2024-01-01 [C] Key fingerprint = 4E2C 1FA3 372C BA96 A06A C34A F0F2 CFEB 0434 1FB5 uid [ultimate] YubiKey User ssb> rsa4096/0xB3CD10E502E19637 2024-01-01 [S] [expires: 2026-05-01] ssb> rsa4096/0x30CBE8C4B085B9F7 2024-01-01 [E] [expires: 2026-05-01] ssb> rsa4096/0xAD9E24E1B8CB9600 2024-01-01 [A] [expires: 2026-05-01] ``` The `>` after a tag indicates the key is stored on a smart card. # Finish setup Verify you have done the following: - [ ] Memorized or wrote down the Certify key (identity) passphrase to a secure and durable location * `echo $CERTIFY_PASS` to see it again; [`passphrase.html`](https://raw.githubusercontent.com/drduh/YubiKey-Guide/master/passphrase.html) or [`passphrase.csv`](https://raw.githubusercontent.com/drduh/YubiKey-Guide/master/passphrase.csv) to transcribe it - [ ] Memorized or wrote down passphrase to encrypted volume on portable storage * `echo $LUKS_PASS` to see it again; [`passphrase.html`](https://raw.githubusercontent.com/drduh/YubiKey-Guide/master/passphrase.html) or [`passphrase.csv`](https://raw.githubusercontent.com/drduh/YubiKey-Guide/master/passphrase.csv) to transcribe it - [ ] Saved the Certify key and Subkeys to encrypted portable storage, to be kept offline * At least two backups are recommended, stored at separate locations - [ ] Exported a copy of the public key where is can be easily accessed later * Separate device or non-encrypted partition was used - [ ] Memorized or wrote down the User PIN and Admin PIN, which are unique and changed from default values * `echo $USER_PIN $ADMIN_PIN` to see them again; [`passphrase.html`](https://raw.githubusercontent.com/drduh/YubiKey-Guide/master/passphrase.html) or [`passphrase.csv`](https://raw.githubusercontent.com/drduh/YubiKey-Guide/master/passphrase.csv) to transcribe them - [ ] Moved Encryption, Signature and Authentication Subkeys to YubiKey * `gpg -K` shows `ssb>` for each of the 3 Subkeys Reboot to clear the ephemeral environment and complete setup. # Using YubiKey Initialize GnuPG: ```console gpg -k ``` Import or create a [hardened configuration](https://github.com/drduh/config/blob/master/gpg.conf): ```console cd ~/.gnupg wget https://raw.githubusercontent.com/drduh/config/master/gpg.conf ``` Set the following option. This avoids the problem where GnuPG will repeatedly prompt for the insertion of an already-inserted YubiKey: ```console touch scdaemon.conf echo "disable-ccid" >>scdaemon.conf ``` Install the required packages: **Debian/Ubuntu** ```console sudo apt update sudo apt install -y gnupg gnupg-agent scdaemon pcscd ``` **OpenBSD** ```console doas pkg_add gnupg pcsc-tools doas rcctl enable pcscd doas reboot ``` Mount the non-encrypted volume with the public key: **Debian/Ubuntu** ```console sudo mkdir /mnt/public sudo mount /dev/sdc2 /mnt/public ``` **OpenBSD** ```console doas mkdir /mnt/public doas mount /dev/sd3i /mnt/public ``` Import the public key: ```console gpg --import /mnt/public/*.asc ``` Or download the public key from a keyserver: ```console gpg --recv $KEYID ``` Or with the URL on YubiKey, retrieve the public key: ```console gpg/card> fetch gpg/card> quit ``` Determine the key ID: ```console gpg -k export KEYID=0xF0F2CFEB04341FB5 ``` Assign ultimate trust by typing `trust` and selecting option `5` then `quit`: ```console gpg --command-fd=0 --pinentry-mode=loopback --edit-key $KEYID < sec# rsa4096/0xF0F2CFEB04341FB5 created: 2024-01-01 expires: never ssb> rsa4096/0xB3CD10E502E19637 created: 2024-01-01 expires: 2026-05-01 card-no: 0006 05553211 ssb> rsa4096/0x30CBE8C4B085B9F7 created: 2024-01-01 expires: 2026-05-01 card-no: 0006 05553211 ssb> rsa4096/0xAD9E24E1B8CB9600 created: 2024-01-01 expires: 2026-05-01 card-no: 0006 05553211 ``` `sec#` indicates the corresponding key is not available (the Certify key is offline). YubiKey is now ready for use! ## Encryption Encrypt a message to yourself (useful for storing credentials or protecting backups): ```console echo "\ntest message string" | \ gpg --encrypt --armor \ --recipient $KEYID --output encrypted.txt ``` Decrypt the message - a prompt for the User PIN will appear: ```console gpg --decrypt --armor encrypted.txt ``` To encrypt to multiple recipients/keys, set the preferred key ID last: ```console echo "test message string" | \ gpg --encrypt --armor \ --recipient $KEYID_2 --recipient $KEYID_1 --recipient $KEYID \ --output encrypted.txt ``` Use a [shell function](https://github.com/drduh/config/blob/master/zshrc) to make encrypting files easier: ```console secret () { output="${1}".$(date +%s).enc gpg --encrypt --armor --output ${output} \ -r $KEYID "${1}" && echo "${1} -> ${output}" } reveal () { output=$(echo "${1}" | rev | cut -c16- | rev) gpg --decrypt --output ${output} "${1}" && \ echo "${1} -> ${output}" } ``` Example output: ```console $ secret document.pdf document.pdf -> document.pdf.1580000000.enc $ reveal document.pdf.1580000000.enc gpg: anonymous recipient; trying secret key 0xF0F2CFEB04341FB5 ... gpg: okay, we are the anonymous recipient. gpg: encrypted with RSA key, ID 0x0000000000000000 document.pdf.1580000000.enc -> document.pdf ``` [drduh/Purse](https://github.com/drduh/Purse) is a password manager based on GnuPG and YubiKey to securely store and use credentials. ## Signature Sign a message: ```console echo "test message string" | gpg --armor --clearsign > signed.txt ``` Verify the signature: ```console gpg --verify signed.txt ``` The output will be similar to: ```console gpg: Signature made Mon 01 Jan 2024 12:00:00 PM UTC gpg: using RSA key CF5A305B808B7A0F230DA064B3CD10E502E19637 gpg: Good signature from "YubiKey User " [ultimate] Primary key fingerprint: 4E2C 1FA3 372C BA96 A06A C34A F0F2 CFEB 0434 1FB5 Subkey fingerprint: CF5A 305B 808B 7A0F 230D A064 B3CD 10E5 02E1 9637 ``` ## Configure touch By default, YubiKey will perform cryptographic operations without requiring any action from the user after the key is unlocked once with the PIN. To require a touch for each key operation, use [YubiKey Manager](https://developers.yubico.com/yubikey-manager/) and the Admin PIN to set key policy. Encryption: ```console ykman openpgp keys set-touch dec on ``` **Note** Versions of YubiKey Manager before 5.1.0 use `enc` instead of `dec` for encryption: ```console ykman openpgp keys set-touch enc on ``` Even older versions of YubiKey Manager use `touch` instead of `set-touch` Signature: ```console ykman openpgp keys set-touch sig on ``` Authentication: ```console ykman openpgp keys set-touch aut on ``` To view and adjust policy options: ```console ykman openpgp keys set-touch -h ``` `Cached` or `Cached-Fixed` may be desirable for YubiKey use with email clients. YubiKey will blink when it is waiting for a touch. On Linux, [maximbaz/yubikey-touch-detector](https://github.com/maximbaz/yubikey-touch-detector) can be used to indicate YubiKey is waiting for a touch. ## SSH Import or create a [hardened configuration](https://github.com/drduh/config/blob/master/gpg-agent.conf): ```console cd ~/.gnupg wget https://raw.githubusercontent.com/drduh/config/master/gpg-agent.conf ``` **Important** The `cache-ttl` options do **not** apply when using YubiKey as a smart card, because the PIN is [cached by the smart card itself](https://dev.gnupg.org/T3362). To clear the PIN from cache (equivalent to `default-cache-ttl` and `max-cache-ttl`), remove YubiKey, or set `forcesig` when editing the card to be prompted for the PIN each time. **Tip** Set `pinentry-program` to `/usr/bin/pinentry-gnome3` for a GUI-based prompt. **macOS** Install pinentry with `brew install pinentry-mac` then edit `gpg-agent.conf` to set the `pinentry-program` path to: * Apple Silicon Macs: `/opt/homebrew/bin/pinentry-mac` * Intel Macs: `/usr/local/bin/pinentry-mac` * MacGPG Suite: `/usr/local/MacGPG2/libexec/pinentry-mac.app/Contents/MacOS/pinentry-mac` Then run `gpgconf --kill gpg-agent` for the change to take effect. To use graphical applications on macOS, [additional setup is required](https://jms1.net/yubikey/make-ssh-use-gpg-agent.md). Create `$HOME/Library/LaunchAgents/gnupg.gpg-agent.plist` with the following contents: ``` Label gnupg.gpg-agent RunAtLoad KeepAlive ProgramArguments /usr/local/MacGPG2/bin/gpg-connect-agent /bye ``` Load it: ```console launchctl load $HOME/Library/LaunchAgents/gnupg.gpg-agent.plist ``` Create `$HOME/Library/LaunchAgents/gnupg.gpg-agent-symlink.plist` with the following contens: ``` Label gnupg.gpg-agent-symlink ProgramArguments /bin/sh -c /bin/ln -sf $HOME/.gnupg/S.gpg-agent.ssh $SSH_AUTH_SOCK RunAtLoad ``` Load it: ```console launchctl load $HOME/Library/LaunchAgents/gnupg.gpg-agent-symlink.plist ``` Reboot or to activate changes. **Windows** Windows can already have some virtual smart card readers installed, like the one provided for Windows Hello. To verify YubiKey is the correct one used by scdaemon, add it to its configuration. Find the YubiKey label using PowerShell: ```powershell PS C:\WINDOWS\system32> Get-PnpDevice -Class SoftwareDevice | Where-Object {$_.FriendlyName -like "*YubiKey*"} | Select-Object -ExpandProperty FriendlyName Yubico YubiKey OTP+FIDO+CCID 0 ``` See [How to setup Signed Git Commits with a YubiKey NEO and GPG and Keybase on Windows (2018)](https://www.hanselman.com/blog/HowToSetupSignedGitCommitsWithAYubiKeyNEOAndGPGAndKeybaseOnWindows.aspx) for more information. Edit `%APPDATA%/gnupg/scdaemon.conf` to add: ```console reader-port ``` Edit `%APPDATA%/gnupg/gpg-agent.conf` to add: ```console enable-ssh-support enable-putty-support ``` Restart the agent: ```console gpg-connect-agent killagent /bye gpg-connect-agent /bye ``` Verify YubiKey details: ```console gpg --card-status ``` Import the public key and set ultimate trust: ```console gpg --import ``` Retrieve the public key id: ```console gpg --list-public-keys ``` Export the SSH public key: ```console gpg --export-ssh-key ``` Copy the public SSH key to a file - it corresponds to the secret key on YubiKey and can be copied to SSH destination hosts. Create a shortcut that points to `gpg-connect-agent /bye` and place it in the startup folder `shell:startup` to make sure the agent starts after reboot. Modify the shortcut properties so it starts in a "Minimized" window. PuTTY can now be used for public-key SSH authentication. When the server asks for public-key verification, PuTTY will forward the request to GnuPG, which will prompt for a PIN to authorize the operation. **WSL** The goal is to configure SSH client inside WSL work together with the Windows agent, such as gpg-agent.exe. See the [WSL agent architecture](media/schema_gpg.png) illustration for an overview. **Note** GnuPG forwarding for cryptographic operations is not supported. See [vuori/weasel-pageant](https://github.com/vuori/weasel-pageant) for more information. One way to forward is just `ssh -A` (still need to eval weasel to setup local ssh-agent), and only relies on OpenSSH. In this track, `ForwardAgent` and `AllowAgentForwarding` in ssh/sshd config may be involved. However, when using ssh socket forwarding, do not enable `ForwardAgent` in ssh config. See [SSH Agent Forwarding](#ssh-agent-forwarding) for more information. This requires Ubuntu 16.04 or newer for WSL and Kleopatra. Download [vuori/weasel-pageant](https://github.com/vuori/weasel-pageant). Add `eval $(/mnt/c//weasel-pageant -r -a /tmp/S.weasel-pageant)` to the shell rc file. Use a named socket here so it can be used in the `RemoteForward` directive of `~/.ssh/config`. Source it with `source ~/.bashrc`. Display the SSH key with `$ ssh-add -l` Edit `~/.ssh/config` to add the following for each agent forwarding host: ```console RemoteForward /tmp/S.weasel-pageant ``` **Note** The remote SSH socket path can be found with `gpgconf --list-dirs agent-ssh-socket` Add the following to the shell rc file: ```console export SSH_AUTH_SOCK=$(gpgconf --list-dirs agent-ssh-socket) ``` Add the following to `/etc/ssh/sshd_config`: ```console StreamLocalBindUnlink yes ``` Reload SSH daemon: ```console sudo service sshd reload ``` Remove YubiKey and reboot. Log back into Windows, open a WSL console and enter `ssh-add -l` - no output should appear. Plug in YubiKey, enter the same command to display the ssh key. Connect to the remote host and use `ssh-add -l` to confirm forwarding works. Agent forwarding may be chained through multiple hosts. Follow the same [protocol](#remote-host-configuration) to configure each host. ### Replace agents To launch `gpg-agent` for use by SSH, use the `gpg-connect-agent /bye` or `gpgconf --launch gpg-agent` commands. Add the following to the shell rc file: ```console export GPG_TTY="$(tty)" export SSH_AUTH_SOCK=$(gpgconf --list-dirs agent-ssh-socket) gpgconf --launch gpg-agent gpg-connect-agent updatestartuptty /bye > /dev/null ``` For fish, `config.fish` should look like this (consider putting them into the `is-interactive` block): ```fish set -x GPG_TTY (tty) set -x SSH_AUTH_SOCK (gpgconf --list-dirs agent-ssh-socket) gpgconf --launch gpg-agent ``` When using `ForwardAgent` for ssh-agent forwarding, `SSH_AUTH_SOCK` only needs to be set on the *local* host, where YubiKey is connected. On the *remote* host, `ssh` will set `SSH_AUTH_SOCK` to something like `/tmp/ssh-mXzCzYT2Np/agent.7541` upon connection. Do **not** set `SSH_AUTH_SOCK` on the remote host - doing so will break [SSH Agent Forwarding](#ssh-agent-forwarding). For `S.gpg-agent.ssh` (see [SSH Agent Forwarding](#ssh-agent-forwarding) for more info), `SSH_AUTH_SOCK` should also be set on the *remote*. However, `GPG_TTY` should not be set on the *remote*, explanation specified in that section. ### Copy public key **Note** It is **not** necessary to import the GnuPG public key in order to use SSH only. Copy and paste the output from `ssh-add` to the server's `authorized_keys` file: ```console $ ssh-add -L ssh-rsa AAAAB4NzaC1yc2EAAAADAQABAAACAz[...]zreOKM+HwpkHzcy9DQcVG2Nw== cardno:000605553211 ``` **Optional** Save the public key for identity file configuration. By default, SSH attempts to use all the identities available via the agent. It's often a good idea to manage exactly which keys SSH will use to connect to a server, for example to separate different roles or [to avoid being fingerprinted by untrusted ssh servers](https://words.filippo.io/ssh-whoami-filippo-io/). To do this you'll need to use the command line argument `-i [identity_file]` or the `IdentityFile` and `IdentitiesOnly` options in `.ssh/config`. The argument provided to `IdentityFile` is traditionally the path to the _private_ key file (for example `IdentityFile ~/.ssh/id_rsa`). For YubiKey, `IdentityFile` must point to the _public_ key file, and `ssh` will select the appropriate private key from those available via ssh-agent. To prevent `ssh` from trying all keys in the agent, use `IdentitiesOnly yes` along with one or more `-i` or `IdentityFile` options for the target host. To reiterate, with `IdentitiesOnly yes`, `ssh` will not enumerate public keys loaded into `ssh-agent` or `gpg-agent`. This means public-key authentication will not proceed unless explicitly named by `ssh -i [identity_file]` or in `.ssh/config` on a per-host basis. In the case of YubiKey usage, to extract the public key from the ssh agent: ```console ssh-add -L | grep "cardno:000605553211" > ~/.ssh/id_rsa_yubikey.pub ``` Then explicitly associate this YubiKey-stored key for used with a host, `github.com` for example, as follows: ```console $ cat << EOF >> ~/.ssh/config Host github.com IdentitiesOnly yes IdentityFile ~/.ssh/id_rsa_yubikey.pub EOF ``` Connect with public key authentication: ```console $ ssh git@github.com -vvv [...] debug2: key: cardno:000605553211 (0x1234567890), debug1: Authentications that can continue: publickey debug3: start over, passed a different list publickey debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: cardno:000605553211 debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Server accepts key: pkalg ssh-rsa blen 535 debug2: input_userauth_pk_ok: fp e5:de:a5:74:b1:3e:96:9b:85:46:e7:28:53:b4:82:c3 debug3: sign_and_send_pubkey: RSA e5:de:a5:74:b1:3e:96:9b:85:46:e7:28:53:b4:82:c3 debug1: Authentication succeeded (publickey). [...] ``` **Tip** To make multiple connections or securely transfer many files, use the [ControlMaster](https://en.wikibooks.org/wiki/OpenSSH/Cookbook/Multiplexing) ssh option. ### Import SSH keys If there are existing SSH keys to make available via `gpg-agent`, they will need to be imported. Then, remove the original private keys. When importing the key, `gpg-agent` uses the key filename as the label - this makes it easier to follow where the key originated from. In this example, we're starting with just the YubiKey in place and importing `~/.ssh/id_rsa`: ```console $ ssh-add -l 4096 SHA256:... cardno:00060123456 (RSA) $ ssh-add ~/.ssh/id_rsa && rm ~/.ssh/id_rsa ``` When invoking `ssh-add`, a prompt for the SSH key passphrase will appear, then the `pinentry` program will prompt and confirm a new passphrase to encrypt the converted key within the GnuPG key store. The migrated key will be listed in `ssh-add -l`: ```console $ ssh-add -l 4096 SHA256:... cardno:00060123456 (RSA) 2048 SHA256:... /Users/username/.ssh/id_rsa (RSA) ``` To show the keys with MD5 fingerprints, as used by `gpg-connect-agent`'s `KEYINFO` and `DELETE_KEY` commands: ```console $ ssh-add -E md5 -l 4096 MD5:... cardno:00060123456 (RSA) 2048 MD5:... /Users/username/.ssh/id_rsa (RSA) ``` When using the key `pinentry` will be invoked to request the key passphrase. The passphrase will be cached for up to 10 idle minutes between uses, up to a maximum of 2 hours. ### SSH agent forwarding **Warning** SSH Agent Forwarding can [add additional risk](https://matrix.org/blog/2019/05/08/post-mortem-and-remediations-for-apr-11-security-incident/#ssh-agent-forwarding-should-be-disabled) - proceed with caution! There are two methods for ssh-agent forwarding, one is provided by OpenSSH and the other is provided by GnuPG. The latter one may be more insecure as raw socket is just forwarded (not like `S.gpg-agent.extra` with only limited functionality; if `ForwardAgent` implemented by OpenSSH is just forwarding the raw socket, then they are insecure to the same degree). But for the latter one, one convenience is that one may forward once and use this agent everywhere in the remote. So again, proceed with caution! For example, tmux does not have environment variables such as `$SSH_AUTH_SOCK` when connecting to remote hosts and attaching an existing session. For each shell, find the socket and `export SSH_AUTH_SOCK=/tmp/ssh-agent-xxx/xxxx.socket`. However, with `S.gpg-agent.ssh` in a fixed place, it can be used as the ssh-agent in shell rc files. #### Use ssh-agent You should now be able to use `ssh -A remote` on the _local_ host to log into _remote_ host, and should then be able to use YubiKey as if it were connected to the remote host. For example, using e.g. `ssh-add -l` on that remote host will show the public key from the YubiKey (`cardno:`). Always use `ForwardAgent yes` only for a single host, never for all servers. #### Use S.gpg-agent.ssh First you need to go through [GnuPG agent forwarding)](#gnupg-agent-forwarding), know the conditions for gpg-agent forwarding and know the location of `S.gpg-agent.ssh` on both the local and the remote. You may use the command: ```console $ gpgconf --list-dirs agent-ssh-socket ``` Edit `.ssh/config` to add the remote host: ```console Host Hostname remote-host.tld StreamLocalBindUnlink yes RemoteForward /run/user/1000/gnupg/S.gpg-agent.ssh /run/user/1000/gnupg/S.gpg-agent.ssh # RemoteForward [remote socket] [local socket] # Note that ForwardAgent is not wanted here! ``` After successfully ssh into the remote host, confirm `/run/user/1000/gnupg/S.gpg-agent.ssh` exists. Then in the *remote* you can type in command line or configure in the shell rc file with: ```console export SSH_AUTH_SOCK="/run/user/$UID/gnupg/S.gpg-agent.ssh" ``` After sourcing the shell rc file, `ssh-add -l` will return the correct public key. **Note** In this process no gpg-agent in the remote is involved, hence `gpg-agent.conf` in the remote is of no use. Also pinentry is invoked locally. #### Chained forwarding If you use `ssh-agent` provided by OpenSSH and want to forward it into a *third* box, you can just `ssh -A third` on the *remote*. Meanwhile, if you use `S.gpg-agent.ssh`, assume you have gone through the steps above and have `S.gpg-agent.ssh` on the *remote*, and you would like to forward this agent into a *third* box, first you may need to configure `sshd_config` and `SSH_AUTH_SOCK` of *third* in the same way as *remote*, then in the ssh config of *remote*, add the following lines ```console Host third Hostname third-host.tld StreamLocalBindUnlink yes RemoteForward /run/user/1000/gnupg/S.gpg-agent.ssh /run/user/1000/gnupg/S.gpg-agent.ssh #RemoteForward [remote socket] [local socket] #Note that ForwardAgent is not wanted here! ``` The path must be set according to `gpgconf --list-dirs agent-ssh-socket` on *remote* and *third* hosts. ## GitHub YubiKey can be used to sign commits and tags, and authenticate SSH to GitHub when configured in [Settings](https://github.com/settings/keys). Configure a signing key: ```console git config --global user.signingkey $KEYID ``` **Important** The `user.email` option must match the email address associated with the PGP identity. To sign commits or tags, use the `-S` option. **Windows** Configure authentication: ```console git config --global core.sshcommand "plink -agent" git config --global gpg.program 'C:\Program Files (x86)\GnuPG\bin\gpg.exe' ``` Then update the repository URL to `git@github.com:USERNAME/repository` **Note** For the error `gpg: signing failed: No secret key` - run `gpg --card-status` with YubiKey plugged in and try the git command again. ## GnuPG agent forwarding YubiKey can be used sign git commits and decrypt files on remote hosts with GnuPG Agent Forwarding. To ssh through another network, especially to push to/pull from GitHub using ssh, see [Remote Machines (SSH Agent forwarding)](#ssh-agent-forwarding). `gpg-agent.conf` is not needed on the remote host; after forwarding, remote GnuPG directly communicates with `S.gpg-agent` without starting `gpg-agent` on the remote host. On the remote host, edit `/etc/ssh/sshd_config` to set `StreamLocalBindUnlink yes` **Optional** Without root access on the remote host to edit `/etc/ssh/sshd_config`, socket located at `gpgconf --list-dir agent-socket` on the remote host will need to be removed before forwarding works. See [AgentForwarding GNUPG wiki page](https://wiki.gnupg.org/AgentForwarding) for more information. Import the public key on the remote host. On the local host, copy the public keyring to the remote host: ```console scp ~/.gnupg/pubring.kbx remote:~/.gnupg/ ``` On modern distributions, such as Fedora 30, there is no need to set `RemoteForward` in `~/.ssh/config` ### Legacy distributions On the local host, run: ```console gpgconf --list-dirs agent-extra-socket ``` This should return a path to agent-extra-socket - `/run/user/1000/gnupg/S.gpg-agent.extra` - though on older Linux distros (and macOS) it may be `/home//.gnupg/S/gpg-agent.extra` Find the agent socket on the **remote** host: ```console gpgconf --list-dirs agent-socket ``` This should return a path such as `/run/user/1000/gnupg/S.gpg-agent` Finally, enable agent forwarding for a given host by adding the following to the local host's `~/.ssh/config` (agent sockets may differ): ``` Host Hostname remote-host.tld StreamLocalBindUnlink yes RemoteForward /run/user/1000/gnupg/S.gpg-agent /run/user/1000/gnupg/S.gpg-agent.extra #RemoteForward [remote socket] [local socket] ``` It may be necessary to edit `gpg-agent.conf` on the *local* host to add the following information: ``` pinentry-program /usr/bin/pinentry-gtk-2 extra-socket /run/user/1000/gnupg/S.gpg-agent.extra ``` **Note** The pinentry program starts on the *local* host, not remote. **Important** Any pinentry program except `pinentry-tty` or `pinentry-curses` may be used. This is because local `gpg-agent` may start headlessly (by systemd without `$GPG_TTY` set locally telling which tty it is on), thus failed to obtain the pin. Errors on the remote may be misleading saying that there is *IO Error*. (Yes, internally there is actually an *IO Error* since it happens when writing to/reading from tty while finding no tty to use, but for end users this is not friendly.) See [Issue 85](https://github.com/drduh/YubiKey-Guide/issues/85) for more information and troubleshooting. ### Chained GnuPG agent forwarding Assume you have gone through the steps above and have `S.gpg-agent` on the *remote*, and you would like to forward this agent into a *third* box, first you may need to configure `sshd_config` of *third* in the same way as *remote*, then in the ssh config of *remote*, add the following lines: ```console Host third Hostname third-host.tld StreamLocalBindUnlink yes RemoteForward /run/user/1000/gnupg/S.gpg-agent /run/user/1000/gnupg/S.gpg-agent #RemoteForward [remote socket] [local socket] ``` You should change the path according to `gpgconf --list-dirs agent-socket` on *remote* and *third*. **Note** On *local* you have `S.gpg-agent.extra` whereas on *remote* and *third*, you only have `S.gpg-agent` ## Using multiple YubiKeys When a GnuPG key is added to YubiKey using `keytocard`, the key is deleted from the keyring and a **stub** is added, pointing to the YubiKey. The stub identifies the GnuPG key ID and YubiKey serial number. When a Subkey is added to an additional YubiKey, the stub is overwritten and will now point to the latest YubiKey. GnuPG will request a specific YubiKey by serial number, as referenced by the stub, and will not recognize another YubiKey with a different serial number. To scan an additional YubiKey and recreate the correct stub: ```console gpg-connect-agent "scd serialno" "learn --force" /bye ``` Alternatively, use a script to delete the GnuPG shadowed key, where the card serial number is stored (see [GnuPG #T2291](https://dev.gnupg.org/T2291)): ```console cat >> ~/scripts/remove-keygrips.sh <&2; exit 1; } KEYGRIPS=$(gpg --with-keygrip --list-secret-keys "$@" | awk '/Keygrip/ { print $3 }') for keygrip in $KEYGRIPS do rm "$HOME/.gnupg/private-keys-v1.d/$keygrip.key" 2> /dev/null done gpg --card-status EOF chmod +x ~/scripts/remove-keygrips.sh ~/scripts/remove-keygrips.sh $KEYID ``` See discussion in Issues [#19](https://github.com/drduh/YubiKey-Guide/issues/19) and [#112](https://github.com/drduh/YubiKey-Guide/issues/112) for more information and troubleshooting steps. ## Email YubiKey can be used to decrypt and sign emails and attachments using [Thunderbird](https://www.thunderbird.net/), [Enigmail](https://www.enigmail.net) and [Mutt](http://www.mutt.org/). Thunderbird supports OAuth 2 authentication and can be used with Gmail. See [this EFF guide](https://ssd.eff.org/en/module/how-use-pgp-linux) for more information. Mutt has OAuth 2 support since version 2.0. ### Thunderbird Follow [instructions on the mozilla wiki](https://wiki.mozilla.org/Thunderbird:OpenPGP:Smartcards#Configure_an_email_account_to_use_an_external_GnuPG_key) to setup your YubiKey with your thunderbird client using the external gpg provider. **Important** Thunderbird [fails](https://github.com/drduh/YubiKey-Guide/issues/448) to decrypt emails if the ASCII `armor` option is enabled in your `~/.gnupg/gpg.conf`. If you see the error `gpg: [don't know]: invalid packet (ctb=2d)` or `message cannot be decrypted (there are unknown problems with this encrypted message)` simply remove this option from your config file. ### Mailvelope [Mailvelope](https://www.mailvelope.com/en) allows YubiKey to be used with Gmail and others. **Important** Mailvelope [does not work](https://github.com/drduh/YubiKey-Guide/issues/178) with the `throw-keyids` option set in `gpg.conf` On macOS, install gpgme using Homebrew: ```console brew install gpgme ``` To allow Chrome to run gpgme, edit `~/Library/Application\ Support/Google/Chrome/NativeMessagingHosts/gpgmejson.json` to add: ```json { "name": "gpgmejson", "description": "Integration with GnuPG", "path": "/usr/local/bin/gpgme-json", "type": "stdio", "allowed_origins": [ "chrome-extension://kajibbejlbohfaggdiogboambcijhkke/" ] } ``` Edit the default path to allow Chrome to find GnuPG: ```console sudo launchctl config user path /usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin ``` Finally, install the [Mailvelope extension](https://chromewebstore.google.com/detail/mailvelope/kajibbejlbohfaggdiogboambcijhkke) from the Chrome web store. ### Mutt Mutt has both CLI and TUI interfaces - the latter provides powerful functions for processing email. In addition, PGP can be integrated such that cryptographic operations can be done without leaving TUI. To enable GnuPG support, copy `/usr/share/doc/mutt/samples/gpg.rc` Edit the file to enable options `pgp_default_key`, `pgp_sign_as` and `pgp_autosign` `source` the file in `muttrc` **Important** `pinentry-tty` set as the pinentry program in `gpg-agent.conf` is reported to cause problems with Mutt TUI, because it uses curses. It is recommended to use `pinentry-curses` or other graphic pinentry program instead. ## Keyserver Public keys can be uploaded to a public server for discoverability: ```console gpg --send-key $KEYID gpg --keyserver keys.gnupg.net --send-key $KEYID gpg --keyserver hkps://keyserver.ubuntu.com:443 --send-key $KEYID ``` Or if [uploading to keys.openpgp.org](https://keys.openpgp.org/about/usage): ```console gpg --send-key $KEYID | curl -T - https://keys.openpgp.org ``` The public key URL can also be added to YubiKey (based on [Shaw 2003](https://datatracker.ietf.org/doc/html/draft-shaw-openpgp-hkp-00)): ```console URL="hkps://keyserver.ubuntu.com:443/pks/lookup?op=get&search=${KEYID}" ``` Edit YubiKey with `gpg --edit-card` and the Admin PIN: ```console gpg/card> admin gpg/card> url URL to retrieve public key: hkps://keyserver.ubuntu.com:443/pks/lookup?op=get&search=0xFF00000000000000 gpg/card> quit ``` # Updating keys PGP does not provide [forward secrecy](https://en.wikipedia.org/wiki/Forward_secrecy), meaning a compromised key may be used to decrypt all past messages. Although keys stored on YubiKey are more difficult to exploit, it is not impossible: the key and PIN could be physically compromised, or a vulnerability may be discovered in firmware or in the random number generator used to create keys, for example. Therefore, it is recommended practice to rotate Subkeys periodically. When a Subkey expires, it can either be renewed or replaced. Both actions require access to the Certify key. - Renewing Subkeys by updating expiration indicates continued possession of the Certify key and is more convenient. - Replacing Subkeys is less convenient but potentially more secure: the new Subkeys will **not** be able to decrypt previous messages, authenticate with SSH, etc. Contacts will need to receive the updated public key and any encrypted secrets need to be decrypted and re-encrypted to new Subkeys to be usable. This process is functionally equivalent to losing the YubiKey and provisioning a new one. Neither rotation method is superior and it is up to personal philosophy on identity management and individual threat modeling to decide which one to use, or whether to expire Subkeys at all. Ideally, Subkeys would be ephemeral: used only once for each unique encryption, signature and authentication event, however in practice that is not really practical nor worthwhile with YubiKey. Advanced users may dedicate an air-gapped machine for frequent credential rotation. To renew or rotate Subkeys, follow the same process as generating keys: boot to a secure environment, install required software and disable networking. Connect the portable storage device with the Certify key and identify the disk label. Decrypt and mount the encrypted volume: ```console sudo cryptsetup luksOpen /dev/sdc1 gnupg-secrets sudo mkdir /mnt/encrypted-storage sudo mount /dev/mapper/gnupg-secrets /mnt/encrypted-storage ``` Mount the non-encrypted public partition: ```console sudo mkdir /mnt/public sudo mount /dev/sdc2 /mnt/public ``` Copy the original private key materials to a temporary working directory: ```console export GNUPGHOME=$(mktemp -d -t gnupg-$(date +%Y-%m-%d)-XXXXXXXXXX) cd $GNUPGHOME cp -avi /mnt/encrypted-storage/gnupg-*/* $GNUPGHOME ``` Confirm the identity is available, set the key id and fingerprint: ```console gpg -K export KEYID=$(gpg -k --with-colons "$IDENTITY" | awk -F: '/^pub:/ { print $5; exit }') export KEYFP=$(gpg -k --with-colons "$IDENTITY" | awk -F: '/^fpr:/ { print $10; exit }') echo $KEYID $KEYFP ``` Recall the Certify key passphrase and set it, for example: ```console export CERTIFY_PASS=ABCD-0123-IJKL-4567-QRST-UVWX ``` ## Renew Subkeys Determine the updated expiration, for example: ```console export EXPIRATION=2026-09-01 export EXPIRATION=2y ``` Renew the Subkeys: ```console gpg --batch --pinentry-mode=loopback \ --passphrase "$CERTIFY_PASS" --quick-set-expire "$KEYFP" "$EXPIRATION" \ $(gpg -K --with-colons | awk -F: '/^fpr:/ { print $10 }' | tail -n "+2" | tr "\n" " ") ``` Export the updated public key: ```console gpg --armor --export $KEYID | sudo tee /mnt/public/$KEYID-$(date +%F).asc ``` Transfer the public key to the destination host and import it: ```console gpg --import /mnt/public/*.asc ``` Alternatively, publish to a public key server and download it: ```console gpg --send-key $KEYID gpg --recv $KEYID ``` The validity of the GnuPG identity will be extended, allowing it to be used again for encryption and signature operations. The SSH public key does **not** need to be updated on remote hosts. ## Rotate Subkeys Follow the original procedure to [Create Subkeys](#create-subkeys). Previous Subkeys can be deleted from the identity. Finish by transfering new Subkeys to YubiKey. Copy the **new** temporary working directory to encrypted storage, which is still mounted: ```console sudo cp -avi $GNUPGHOME /mnt/encrypted-storage ``` Unmount and close the encrypted volume: ```console sudo umount /mnt/encrypted-storage sudo cryptsetup luksClose gnupg-secrets ``` Export the updated public key: ```console sudo mkdir /mnt/public sudo mount /dev/sdc2 /mnt/public gpg --armor --export $KEYID | sudo tee /mnt/public/$KEYID-$(date +%F).asc sudo umount /mnt/public ``` Remove the storage device and follow the original steps to transfer new Subkeys (`4`, `5` and `6`) to YubiKey, replacing existing ones. Reboot or securely erase the GnuPG temporary working directory. # Reset YubiKey If PIN attempts are exceeded, the YubiKey is locked and must be [Reset](https://developers.yubico.com/ykneo-openpgp/ResetApplet.html) and set up again using the encrypted backup. Copy the following to a file and run `gpg-connect-agent -r $file` to lock and terminate the card. Then re-insert YubiKey to complete reset. ```console /hex scd serialno scd apdu 00 20 00 81 08 40 40 40 40 40 40 40 40 scd apdu 00 20 00 81 08 40 40 40 40 40 40 40 40 scd apdu 00 20 00 81 08 40 40 40 40 40 40 40 40 scd apdu 00 20 00 81 08 40 40 40 40 40 40 40 40 scd apdu 00 20 00 83 08 40 40 40 40 40 40 40 40 scd apdu 00 20 00 83 08 40 40 40 40 40 40 40 40 scd apdu 00 20 00 83 08 40 40 40 40 40 40 40 40 scd apdu 00 20 00 83 08 40 40 40 40 40 40 40 40 scd apdu 00 e6 00 00 scd apdu 00 44 00 00 /echo Card has been successfully reset. /bye ``` Or use `ykman` (sometimes in `~/.local/bin/`): ```console $ ykman openpgp reset WARNING! This will delete all stored OpenPGP keys and data and restore factory settings? [y/N]: y Resetting OpenPGP data, don't remove your YubiKey... Success! All data has been cleared and default PINs are set. PIN: 123456 Reset code: NOT SET Admin PIN: 12345678 ``` # Optional hardening The following steps may improve the security and privacy of YubiKey. ## Improving entropy Generating cryptographic keys requires high-quality [randomness](https://www.random.org/randomness/), measured as entropy. Most operating systems use software-based pseudorandom number generators or CPU-based hardware random number generators (HRNG). Optionally, a device such as [OneRNG](https://onerng.info/onerng/) may be used to [increase the speed](https://lwn.net/Articles/648550/) and possibly the quality of available entropy. Before creating keys, configure [rng-tools](https://wiki.archlinux.org/title/Rng-tools): ```console sudo apt -y install at rng-tools python3-gnupg openssl wget https://github.com/OneRNG/onerng.github.io/raw/master/sw/onerng_3.7-1_all.deb ``` Verify the package: ```console sha256sum onerng_3.7-1_all.deb ``` The value must match: ```console b7cda2fe07dce219a95dfeabeb5ee0f662f64ba1474f6b9dddacc3e8734d8f57 ``` Install the package: ```console sudo dpkg -i onerng_3.7-1_all.deb echo "HRNGDEVICE=/dev/ttyACM0" | sudo tee /etc/default/rng-tools ``` Insert the device and restart rng-tools: ```console sudo atd sudo service rng-tools restart ``` ## Enable KDF **Note** This feature may not be compatible with older GnuPG versions, especially mobile clients. These incompatible clients will not function because the PIN will always be rejected. This step must be completed before changing PINs or moving keys or an error will occur: `gpg: error for setup KDF: Conditions of use not satisfied` Key Derived Function (KDF) enables YubiKey to store the hash of PIN, preventing the PIN from being passed as plain text. Enable KDF using the default Admin PIN of `12345678`: ```console gpg --command-fd=0 --pinentry-mode=loopback --card-edit < # Stops services managed by systemctl sudo pkill -f '' # Terminate the process by matching it's command line string pgrep -f '' # Obtain the PID sudo kill # Terminate the process via its PID ``` Now connect to a network. # Notes 1. YubiKey has two configurations, invoked with either a short or long press. By default, the short-press mode is configured for HID OTP; a brief touch will emit an OTP string starting with `cccccccc`. OTP mode can be swapped to the second configuration via the YubiKey Personalization tool or disabled entirely using [YubiKey Manager](https://developers.yubico.com/yubikey-manager): `ykman config usb -d OTP` 1. Using YubiKey for GnuPG does not prevent use of [other features](https://developers.yubico.com/), such as [WebAuthn](https://developers.yubico.com/WebAuthn/) and [OTP](https://developers.yubico.com/OTP/). 1. Add additional identities to a Certify key with the `adduid` command during setup, then trust it ultimately with `trust` and `5` to configure for use. 1. To switch between YubiKeys, remove the first YubiKey and restart gpg-agent, ssh-agent and pinentry with `pkill "gpg-agent|ssh-agent|pinentry" ; eval $(gpg-agent --daemon --enable-ssh-support)` then insert the other YubiKey and run `gpg-connect-agent updatestartuptty /bye` 1. To use YubiKey on multiple computers, import the corresponding public keys, then confirm YubiKey is visible with `gpg --card-status`. Trust the imported public keys ultimately with `trust` and `5`, then `gpg --list-secret-keys` will show the correct and trusted key. # Troubleshooting - Use `man gpg` to understand GnuPG options and command-line flags. - To get more information on potential errors, restart the `gpg-agent` process with debug output to the console with `pkill gpg-agent; gpg-agent --daemon --no-detach -v -v --debug-level advanced --homedir ~/.gnupg`. - A lot of issues can be fixed by removing and re-inserting YubiKey, or restarting the `gpg-agent` process. - If you receive the error, `Yubikey core error: no yubikey present` - make sure the YubiKey is inserted correctly. It should blink once when plugged in. - If you still receive the error, `Yubikey core error: no yubikey present` - you likely need to install newer versions of yubikey-personalize as outlined in [Install software](#install-software). - If you see `General key info..: [none]` in card status output - import the public key. - If you receive the error, `gpg: decryption failed: secret key not available` - you likely need to install GnuPG version 2.x. Another possibility is that there is a problem with the PIN, e.g., it is too short or blocked. - If you receive the error, `Yubikey core error: write error` - YubiKey is likely locked. Install and run yubikey-personalization-gui to unlock it. - If you receive the error, `Key does not match the card's capability` - you likely need to use 2048-bit RSA key sizes. - If you receive the error, `sign_and_send_pubkey: signing failed: agent refused operation` - make sure you replaced `ssh-agent` with `gpg-agent` as noted above. - If you still receive the error, `sign_and_send_pubkey: signing failed: agent refused operation` - [run the command](https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=835394) `gpg-connect-agent updatestartuptty /bye` - If you still receive the error, `sign_and_send_pubkey: signing failed: agent refused operation` - edit `~/.gnupg/gpg-agent.conf` to set a valid `pinentry` program path. `gpg: decryption failed: No secret key` could also indicate an invalid `pinentry` path - If you still receive the error, `sign_and_send_pubkey: signing failed: agent refused operation` - it is a [known issue](https://bbs.archlinux.org/viewtopic.php?id=274571) that openssh 8.9p1 and higher has issues with YubiKey. Adding `KexAlgorithms -sntrup761x25519-sha512@openssh.com` to `/etc/ssh/ssh_config` often resolves the issue. - If you receive the error, `The agent has no identities` from `ssh-add -L`, make sure you have installed and started `scdaemon` - If you receive the error, `Error connecting to agent: No such file or directory` from `ssh-add -L`, the UNIX file socket that the agent uses for communication with other processes may not be set up correctly. On Debian, try `export SSH_AUTH_SOCK="/run/user/$UID/gnupg/S.gpg-agent.ssh"`. Also see that `gpgconf --list-dirs agent-ssh-socket` is returning single path, to existing `S.gpg-agent.ssh` socket. - If you receive the error, `Permission denied (publickey)`, increase ssh verbosity with the `-v` flag and verify the public key from the card is being offered: `Offering public key: RSA SHA256:abcdefg... cardno:00060123456`. If it is, verify the correct user the target system - not the user on the local system. Otherwise, be sure `IdentitiesOnly` is not [enabled](https://github.com/FiloSottile/whosthere#how-do-i-stop-it) for this host. - If SSH authentication still fails - add up to 3 `-v` flags to the `ssh` command to increase verbosity. - If it still fails, it may be useful to stop the background `sshd` daemon process service on the server (e.g. using `sudo systemctl stop sshd`) and instead start it in the foreground with extensive debugging output, using `/usr/sbin/sshd -eddd`. Note that the server will not fork and will only process one connection, therefore has to be re-started after every `ssh` test. - If you receive the error, `Please insert the card with serial number` see [Using Multiple Keys](#using-multiple-keys). - If you receive the error, `There is no assurance this key belongs to the named user` or `encryption failed: Unusable public key` or `No public key` use `gpg --edit-key` to set `trust` to `5 = I trust ultimately` - If, when you try the above command, you get the error `Need the secret key to do this` - specify trust for the key in `~/.gnupg/gpg.conf` by using the `trust-key [key ID]` directive. - If, when using a previously provisioned YubiKey on a new computer with `pass`, you see the following error on `pass insert`, you need to adjust the trust associated with the key. See the note above. ``` gpg: 0x0000000000000000: There is no assurance this key belongs to the named user gpg: [stdin]: encryption failed: Unusable public key ``` - If you receive the error, `gpg: 0x0000000000000000: skipped: Unusable public key`, `signing failed: Unusable secret key`, or `encryption failed: Unusable public key` the Subkey may be expired and can no longer be used to encrypt nor sign messages. It can still be used to decrypt and authenticate, however. - If the _pinentry_ graphical dialog does not show and this error appears: `sign_and_send_pubkey: signing failed: agent refused operation`, install the `dbus-user-session` package and restart for the `dbus` user session to be fully inherited. This is because `pinentry` complains about `No $DBUS_SESSION_BUS_ADDRESS found`, falls back to `curses` but doesn't find the expected `tty` - If, when you try the above `--card-status` command, you get receive the error, `gpg: selecting card failed: No such device` or `gpg: OpenPGP card not available: No such device`, it's possible that the latest release of pcscd is now requires polkit rules to operate properly. Create the following file to allow users in the `wheel` group to use the card. Be sure to restart pcscd when you're done to allow the new rules to take effect. ```console cat << EOF > /etc/polkit-1/rules.d/99-pcscd.rules polkit.addRule(function(action, subject) { if (action.id == "org.debian.pcsc-lite.access_card" && subject.isInGroup("wheel")) { return polkit.Result.YES; } }); polkit.addRule(function(action, subject) { if (action.id == "org.debian.pcsc-lite.access_pcsc" && subject.isInGroup("wheel")) { return polkit.Result.YES; } }); EOF ``` - If the public key is lost, follow [this guide](https://www.nicksherlock.com/2021/08/recovering-lost-gpg-public-keys-from-your-yubikey/) to recover it from YubiKey. - Refer to Yubico article [Troubleshooting Issues with GPG](https://support.yubico.com/hc/en-us/articles/360013714479-Troubleshooting-Issues-with-GPG) for additional guidance. # Alternative solutions * [`vorburger/ed25519-sk.md`](https://github.com/vorburger/vorburger.ch-Notes/blob/develop/security/ed25519-sk.md) - use YubiKey for SSH without GnuPG * [`smlx/piv-agent`](https://github.com/smlx/piv-agent) - SSH and GnuPG agent which can be used with PIV devices * [`keytotpm`](https://www.gnupg.org/documentation/manuals/gnupg/OpenPGP-Key-Management.html) - use GnuPG with TPM systems # Additional resources * [Yubico - PGP](https://developers.yubico.com/PGP/) * [Yubico - Yubikey Personalization](https://developers.yubico.com/yubikey-personalization/) * [A Visual Explanation of GPG Subkeys (2022)](https://rgoulter.com/blog/posts/programming/2022-06-10-a-visual-explanation-of-gpg-subkeys.html) * [dhess/nixos-yubikey](https://github.com/dhess/nixos-yubikey) * [lsasolutions/makegpg](https://gitlab.com/lsasolutions/makegpg) * [Trammell Hudson - Yubikey (2020)](https://trmm.net/Yubikey) * [Yubikey forwarding SSH keys (2019)](https://blog.onefellow.com/post/180065697833/yubikey-forwarding-ssh-keys) * [GPG Agent Forwarding (2018)](https://mlohr.com/gpg-agent-forwarding/) * [Stick with security: YubiKey, SSH, GnuPG, macOS (2018)](https://evilmartians.com/chronicles/stick-with-security-yubikey-ssh-gnupg-macos) * [PGP and SSH keys on a Yubikey NEO (2015)](https://www.esev.com/blog/post/2015-01-pgp-ssh-key-on-yubikey-neo/) * [Offline GnuPG Master Key and Subkeys on YubiKey NEO Smartcard (2014)](https://blog.josefsson.org/2014/06/23/offline-gnupg-master-key-and-subkeys-on-yubikey-neo-smartcard/) * [Creating the perfect GPG keypair (2013)](https://alexcabal.com/creating-the-perfect-gpg-keypair/)