1735 lines
64 KiB
Markdown
1735 lines
64 KiB
Markdown
This is a guide to using [YubiKey](https://www.yubico.com/products/yubikey-hardware/) as a [SmartCard](https://security.stackexchange.com/questions/38924/how-does-storing-gpg-ssh-private-keys-on-smart-cards-compare-to-plain-usb-drives) for storing GPG encryption, signing and authentication keys, which can also be used for SSH. Many of the principles in this document are applicable to other smart card devices.
|
|
|
|
Keys stored on YubiKey are non-exportable (as opposed to file-based keys that are stored on disk) and are convenient for everyday use. Instead of having to remember and enter passphrases to unlock SSH/GPG keys, YubiKey needs only a physical touch after being unlocked with a PIN code. All signing and encryption operations happen on the card, rather than in OS memory.
|
|
|
|
**New!** [drduh/Purse](https://github.com/drduh/Purse) is a password manager which uses GPG and YubiKey.
|
|
|
|
If you have a comment or suggestion, please open an [issue](https://github.com/drduh/YubiKey-Guide/issues) on GitHub.
|
|
|
|
- [Purchase YubiKey](#purchase-yubikey)
|
|
- [Live image](#live-image)
|
|
- [Required software](#required-software)
|
|
* [Entropy](#entropy)
|
|
- [Creating keys](#creating-keys)
|
|
- [Master key](#master-key)
|
|
- [Subkeys](#subkeys)
|
|
* [Signing](#signing)
|
|
* [Encryption](#encryption)
|
|
* [Authentication](#authentication)
|
|
- [Verify keys](#verify-keys)
|
|
- [Export keys](#export-keys)
|
|
- [Backup keys](#backup-keys)
|
|
* [Linux](#linux)
|
|
* [OpenBSD](#openbsd)
|
|
- [Configure YubiKey](#configure-yubikey)
|
|
- [Configure Smartcard](#configure-smartcard)
|
|
* [Change PIN](#change-pin)
|
|
* [Set information](#set-information)
|
|
- [Transfer keys](#transfer-keys)
|
|
* [Signing](#signing-1)
|
|
* [Encryption](#encryption-1)
|
|
* [Authentication](#authentication-1)
|
|
- [Verify card](#verify-card)
|
|
- [Export public key](#export-public-key)
|
|
- [Cleanup](#cleanup)
|
|
- [Using keys](#using-keys)
|
|
- [Import public key](#import-public-key)
|
|
* [Trust master key](#trust-master-key)
|
|
- [Insert YubiKey](#insert-yubikey)
|
|
- [Encryption](#encryption-2)
|
|
- [Decryption](#decryption)
|
|
- [Signing](#signing-2)
|
|
- [Verifying signature](#verifying-signature)
|
|
- [SSH](#ssh)
|
|
* [Create configuration](#create-configuration)
|
|
* [Replace agents](#replace-agents)
|
|
* [Copy public key](#copy-public-key)
|
|
* [(Optional) Save public key for identity file configuration](#-optional--save-public-key-for-identity-file-configuration)
|
|
* [Connect with public key authentication](#connect-with-public-key-authentication)
|
|
* [Touch to authenticate](#touch-to-authenticate)
|
|
* [Import SSH keys](#import-ssh-keys)
|
|
* [Remote Machines (agent forwarding)](#remote-machines--agent-forwarding-)
|
|
* [GitHub](#github)
|
|
* [OpenBSD](#openbsd-1)
|
|
* [Windows](#windows)
|
|
+ [WSL](#wsl)
|
|
- [Prerequisites](#prerequisites)
|
|
- [WSL configuration](#wsl-configuration)
|
|
- [Remote host configuration](#remote-host-configuration)
|
|
- [Final test](#final-test)
|
|
- [Troubleshooting](#troubleshooting)
|
|
- [Notes](#notes)
|
|
- [Links](#links)
|
|
|
|
# Purchase YubiKey
|
|
|
|
All YubiKeys except the blue "security key" model are compatible with this guide. NEO models are limited to 2048-bit RSA keys. See [Compare YubiKeys](https://www.yubico.com/products/yubikey-hardware/compare-yubikeys/).
|
|
|
|
Consider purchasing a pair of YubiKeys, programming both, and storing one in a safe secondary location, in case of loss or damage to the first key.
|
|
|
|
# Live image
|
|
|
|
It is recommended to generate cryptographic keys and configure YubiKey from a secure environment to minimize exposure. One way to do that is by downloading and booting to a [Debian Live](https://www.debian.org/CD/live/) or [Tails](https://tails.boum.org/index.en.html) image loaded from a USB drive into memory.
|
|
|
|
Download the latest image and verify its integrity:
|
|
|
|
```console
|
|
$ curl -LfO https://cdimage.debian.org/debian-cd/current-live/amd64/iso-hybrid/debian-live-9.6.0-amd64-xfce.iso
|
|
$ curl -LfO https://cdimage.debian.org/debian-cd/current-live/amd64/iso-hybrid/SHA512SUMS
|
|
$ curl -LfO https://cdimage.debian.org/debian-cd/current-live/amd64/iso-hybrid/SHA512SUMS.sign
|
|
|
|
$ gpg --verify SHA512SUMS.sign SHA512SUMS
|
|
[...]
|
|
gpg: Good signature from "Debian CD signing key <debian-cd@lists.debian.org>" [unknown]
|
|
[...]
|
|
|
|
$ grep $(sha512sum debian-live-9.6.0-amd64-xfce.iso) SHA512SUMS
|
|
e35dd65fe1b078f71fcf04fa749a05bfefe4aa11a9e80f116ceec0566d65636a4ac84a9aff22aa3f7a8eeb10289d0c2f54dfe7c599d8aa16663e4f9a74f3eec5 debian-live-9.6.0-amd64-xfce.iso
|
|
```
|
|
|
|
Mount a USB disk and copy the image over to it:
|
|
|
|
```console
|
|
$ sudo dd if=debian-live-9.6.0-amd64-xfce.iso of=/dev/sdc bs=4M && sync
|
|
```
|
|
|
|
Shut down the computer and disconnect any hard drives and unnecessary peripherals.
|
|
|
|
Plug in the USB disk and boot to the live image. Configure networking to continue. If the screen locks, unlock with user/live.
|
|
|
|
# Required software
|
|
|
|
Install several packages required for the following steps:
|
|
|
|
**Debian/Ubuntu**
|
|
|
|
```console
|
|
$ sudo apt-get update
|
|
|
|
$ sudo apt-get install -y \
|
|
curl gnupg2 gnupg-agent \
|
|
cryptsetup scdaemon pcscd \
|
|
yubikey-personalization \
|
|
dirmngr \
|
|
secure-delete
|
|
```
|
|
|
|
**Arch Linux**
|
|
|
|
```console
|
|
$ sudo pacman -Syu gnupg2 pcsclite ccid yubikey-personalization
|
|
```
|
|
|
|
**RHEL7**
|
|
|
|
```console
|
|
$ sudo yum install -y gnupg2 pinentry-curses pcsc-lite pcsc-lite-libs gnupg2-smime
|
|
```
|
|
|
|
**OpenBSD**
|
|
|
|
```console
|
|
$ doas pkg_add gnupg pcsc-tools
|
|
```
|
|
|
|
**macOS**
|
|
|
|
Download and install [Homebrew](https://brew.sh/) and the following Brew packages - `gnupg yubikey-personalization hopenpgp-tools ykman pinentry-mac`
|
|
|
|
**Windows**
|
|
|
|
Download and install [Gpg4Win](https://www.gpg4win.org/) and [PuTTY](https://putty.org).
|
|
|
|
**Note** You may also need more recent versions of [yubikey-personalization](https://developers.yubico.com/yubikey-personalization/Releases/) and [yubico-c](https://developers.yubico.com/yubico-c/Releases/).
|
|
|
|
|
|
## Entropy
|
|
|
|
Generating keys will require a lot of randomness. To check the available bits of entropy available on Linux:
|
|
|
|
```console
|
|
$ cat /proc/sys/kernel/random/entropy_avail
|
|
849
|
|
```
|
|
|
|
**Optional** A hardware random number generator like [OneRNG](http://onerng.info/onerng/) will increase the speed of entropy generation and possibly its quality. To install and configure OneRNG:
|
|
|
|
```console
|
|
$ sudo apt-get install -y rng-tools at python-gnupg openssl
|
|
|
|
$ curl -LfO https://github.com/OneRNG/onerng.github.io/raw/master/sw/onerng_3.6-1_all.deb
|
|
|
|
$ sha256sum onerng_3.6-1_all.deb
|
|
a9ccf7b04ee317dbfc91518542301e2d60ebe205d38e80563f29aac7cd845ccb
|
|
|
|
$ sudo dpkg -i onerng_3.6-1_all.deb
|
|
|
|
$ echo "HRNGDEVICE=/dev/ttyACM0" | sudo tee /etc/default/rng-tools
|
|
|
|
$ sudo service rng-tools restart
|
|
```
|
|
|
|
If the service fails to start, kick off `atd` and try again:
|
|
|
|
```console
|
|
$ sudo atd ; sudo service rng-tools restart
|
|
```
|
|
|
|
Plug in the OneRNG and empty `/dev/random` - the light on the device should dim briefly. Verify the available entropy pool is re-seeded.
|
|
|
|
```console
|
|
$ cat /dev/random >/dev/null
|
|
[Control-C]
|
|
|
|
$ cat /proc/sys/kernel/random/entropy_avail
|
|
3049
|
|
```
|
|
|
|
An entropy pool value greater than 3000 is sufficient.
|
|
|
|
# Creating keys
|
|
|
|
Create a temporary directory which will be deleted on [reboot](https://en.wikipedia.org/wiki/Tmpfs):
|
|
|
|
```console
|
|
$ export GNUPGHOME=$(mktemp -d) ; echo $GNUPGHOME
|
|
/tmp/tmp.aaiTTovYgo
|
|
```
|
|
|
|
Create a hardened configuration for GPG with the following options or by downloading [drduh/config/gpg.conf](https://github.com/drduh/config/blob/master/gpg.conf):
|
|
|
|
```console
|
|
$ curl -o $GNUPGHOME/gpg.conf https://raw.githubusercontent.com/drduh/config/master/gpg.conf
|
|
|
|
$ cat $GNUPGHOME/gpg.conf
|
|
personal-cipher-preferences AES256 AES192 AES
|
|
personal-digest-preferences SHA512 SHA384 SHA256
|
|
personal-compress-preferences ZLIB BZIP2 ZIP Uncompressed
|
|
default-preference-list SHA512 SHA384 SHA256 AES256 AES192 AES ZLIB BZIP2 ZIP Uncompressed
|
|
cert-digest-algo SHA512
|
|
s2k-digest-algo SHA512
|
|
s2k-cipher-algo AES256
|
|
charset utf-8
|
|
fixed-list-mode
|
|
no-comments
|
|
no-emit-version
|
|
keyid-format 0xlong
|
|
list-options show-uid-validity
|
|
verify-options show-uid-validity
|
|
with-fingerprint
|
|
require-cross-certification
|
|
no-symkey-cache
|
|
throw-keyids
|
|
use-agent
|
|
```
|
|
|
|
Disable networking for the remainder of the setup.
|
|
|
|
# Master key
|
|
|
|
The first key to generate is the master key. It will be used for certification only - to issue subkeys that are used for encryption, signing and authentication. This master key should be kept offline at all times and only accessed to revoke or issue new subkeys.
|
|
|
|
You'll be prompted to enter and verify a passphrase - keep it handy as you'll need it throughout. To generate a strong passphrase which could be written down in a hidden or secure place; or memorized:
|
|
|
|
```console
|
|
$ gpg --gen-random -a 0 24
|
|
ydOmByxmDe63u7gqx2XI9eDgpvJwibNH
|
|
```
|
|
|
|
Generate a new key with GPG, selecting `(8) RSA (set your own capabilities)`, `Certify`-only and `4096` bit keysize. Do not set the key to expire - see [Note #3](#notes).
|
|
|
|
```console
|
|
$ gpg --expert --full-generate-key
|
|
|
|
Please select what kind of key you want:
|
|
(1) RSA and RSA (default)
|
|
(2) DSA and Elgamal
|
|
(3) DSA (sign only)
|
|
(4) RSA (sign only)
|
|
(7) DSA (set your own capabilities)
|
|
(8) RSA (set your own capabilities)
|
|
(9) ECC and ECC
|
|
(10) ECC (sign only)
|
|
(11) ECC (set your own capabilities)
|
|
(13) Existing key
|
|
Your selection? 8
|
|
|
|
Possible actions for a RSA key: Sign Certify Encrypt Authenticate
|
|
Current allowed actions: Sign Certify Encrypt
|
|
|
|
(S) Toggle the sign capability
|
|
(E) Toggle the encrypt capability
|
|
(A) Toggle the authenticate capability
|
|
(Q) Finished
|
|
|
|
Your selection? E
|
|
|
|
Possible actions for a RSA key: Sign Certify Encrypt Authenticate
|
|
Current allowed actions: Sign Certify
|
|
|
|
(S) Toggle the sign capability
|
|
(E) Toggle the encrypt capability
|
|
(A) Toggle the authenticate capability
|
|
(Q) Finished
|
|
|
|
Your selection? S
|
|
|
|
Possible actions for a RSA key: Sign Certify Encrypt Authenticate
|
|
Current allowed actions: Certify
|
|
|
|
(S) Toggle the sign capability
|
|
(E) Toggle the encrypt capability
|
|
(A) Toggle the authenticate capability
|
|
(Q) Finished
|
|
|
|
Your selection? Q
|
|
RSA keys may be between 1024 and 4096 bits long.
|
|
What keysize do you want? (2048) 4096
|
|
Requested keysize is 4096 bits
|
|
Please specify how long the key should be valid.
|
|
0 = key does not expire
|
|
<n> = key expires in n days
|
|
<n>w = key expires in n weeks
|
|
<n>m = key expires in n months
|
|
<n>y = key expires in n years
|
|
Key is valid for? (0) 0
|
|
Key does not expire at all
|
|
Is this correct? (y/N) y
|
|
|
|
GnuPG needs to construct a user ID to identify your key.
|
|
|
|
Real name: Dr Duh
|
|
Email address: doc@duh.to
|
|
Comment: [Optional - leave blank]
|
|
You selected this USER-ID:
|
|
"Dr Duh <doc@duh.to>"
|
|
|
|
Change (N)ame, (C)omment, (E)mail or (O)kay/(Q)uit? o
|
|
|
|
We need to generate a lot of random bytes. It is a good idea to perform
|
|
some other action (type on the keyboard, move the mouse, utilize the
|
|
disks) during the prime generation; this gives the random number
|
|
generator a better chance to gain enough entropy.
|
|
gpg: /tmp.FLZC0xcM/trustdb.gpg: trustdb created
|
|
gpg: key 0xFF3E7D88647EBCDB marked as ultimately trusted
|
|
gpg: directory '/tmp.FLZC0xcM/openpgp-revocs.d' created
|
|
gpg: revocation certificate stored as '/tmp.FLZC0xcM/openpgp-revocs.d/011CE16BD45B27A55BA8776DFF3E7D88647EBCDB.rev'
|
|
public and secret key created and signed.
|
|
|
|
Note that this key cannot be used for encryption. You may want to use
|
|
the command "--edit-key" to generate a subkey for this purpose.
|
|
pub rsa4096/0xFF3E7D88647EBCDB 2017-10-09 [C]
|
|
Key fingerprint = 011C E16B D45B 27A5 5BA8 776D FF3E 7D88 647E BCDB
|
|
uid Dr Duh <doc@duh.to>
|
|
```
|
|
|
|
As of GPG [version 2.1](https://www.gnupg.org/faq/whats-new-in-2.1.html#autorev), a revocation certificate is automatically generated at this time.
|
|
|
|
Export the key ID as a [variable](https://stackoverflow.com/questions/1158091/defining-a-variable-with-or-without-export/1158231#1158231) (`KEYID`) for use later:
|
|
|
|
```console
|
|
$ export KEYID=0xFF3E7D88647EBCDB
|
|
```
|
|
|
|
# Subkeys
|
|
|
|
Edit the Master key to add subkeys:
|
|
|
|
```console
|
|
$ gpg --expert --edit-key $KEYID
|
|
|
|
Secret key is available.
|
|
|
|
sec rsa4096/0xEA5DE91459B80592
|
|
created: 2017-10-09 expires: never usage: C
|
|
trust: ultimate validity: ultimate
|
|
[ultimate] (1). Dr Duh <doc@duh.to>
|
|
```
|
|
|
|
Use 4096-bit keysize - or 2048-bit on NEO.
|
|
|
|
Use a 1 year expiration - it can always be renewed using the offline Master certification key.
|
|
|
|
## Signing
|
|
|
|
Create a [signing key](https://stackoverflow.com/questions/5421107/can-rsa-be-both-used-as-encryption-and-signature/5432623#5432623) by selecting `(4) RSA (sign only)`:
|
|
|
|
```console
|
|
gpg> addkey
|
|
Key is protected.
|
|
|
|
You need a passphrase to unlock the secret key for
|
|
user: "Dr Duh <doc@duh.to>"
|
|
4096-bit RSA key, ID 0xFF3E7D88647EBCDB, created 2016-05-24
|
|
|
|
Please select what kind of key you want:
|
|
(3) DSA (sign only)
|
|
(4) RSA (sign only)
|
|
(5) Elgamal (encrypt only)
|
|
(6) RSA (encrypt only)
|
|
(7) DSA (set your own capabilities)
|
|
(8) RSA (set your own capabilities)
|
|
Your selection? 4
|
|
RSA keys may be between 1024 and 4096 bits long.
|
|
What keysize do you want? (2048) 4096
|
|
Requested keysize is 4096 bits
|
|
Please specify how long the key should be valid.
|
|
0 = key does not expire
|
|
<n> = key expires in n days
|
|
<n>w = key expires in n weeks
|
|
<n>m = key expires in n months
|
|
<n>y = key expires in n years
|
|
Key is valid for? (0) 1y
|
|
Key expires at Mon 10 Sep 2018 00:00:00 PM UTC
|
|
Is this correct? (y/N) y
|
|
Really create? (y/N) y
|
|
We need to generate a lot of random bytes. It is a good idea to perform
|
|
some other action (type on the keyboard, move the mouse, utilize the
|
|
disks) during the prime generation; this gives the random number
|
|
generator a better chance to gain enough entropy.
|
|
|
|
sec rsa4096/0xFF3E7D88647EBCDB
|
|
created: 2017-10-09 expires: never usage: C
|
|
trust: ultimate validity: ultimate
|
|
ssb rsa4096/0xBECFA3C1AE191D15
|
|
created: 2017-10-09 expires: 2018-10-09 usage: S
|
|
[ultimate] (1). Dr Duh <doc@duh.to>
|
|
```
|
|
|
|
## Encryption
|
|
|
|
Next, create an [encryption key](https://www.cs.cornell.edu/courses/cs5430/2015sp/notes/rsa_sign_vs_dec.php) by selecting `(6) RSA (encrypt only)`:
|
|
|
|
```console
|
|
gpg> addkey
|
|
Please select what kind of key you want:
|
|
(3) DSA (sign only)
|
|
(4) RSA (sign only)
|
|
(5) Elgamal (encrypt only)
|
|
(6) RSA (encrypt only)
|
|
(7) DSA (set your own capabilities)
|
|
(8) RSA (set your own capabilities)
|
|
(10) ECC (sign only)
|
|
(11) ECC (set your own capabilities)
|
|
(12) ECC (encrypt only)
|
|
(13) Existing key
|
|
Your selection? 6
|
|
RSA keys may be between 1024 and 4096 bits long.
|
|
What keysize do you want? (2048) 4096
|
|
Requested keysize is 4096 bits
|
|
Please specify how long the key should be valid.
|
|
0 = key does not expire
|
|
<n> = key expires in n days
|
|
<n>w = key expires in n weeks
|
|
<n>m = key expires in n months
|
|
<n>y = key expires in n years
|
|
Key is valid for? (0) 1y
|
|
Key expires at Mon 10 Sep 2018 00:00:00 PM UTC
|
|
Is this correct? (y/N) y
|
|
Really create? (y/N) y
|
|
We need to generate a lot of random bytes. It is a good idea to perform
|
|
some other action (type on the keyboard, move the mouse, utilize the
|
|
disks) during the prime generation; this gives the random number
|
|
generator a better chance to gain enough entropy.
|
|
|
|
sec rsa4096/0xFF3E7D88647EBCDB
|
|
created: 2017-10-09 expires: never usage: C
|
|
trust: ultimate validity: ultimate
|
|
ssb rsa4096/0xBECFA3C1AE191D15
|
|
created: 2017-10-09 expires: 2018-10-09 usage: S
|
|
ssb rsa4096/0x5912A795E90DD2CF
|
|
created: 2017-10-09 expires: 2018-10-09 usage: E
|
|
[ultimate] (1). Dr Duh <doc@duh.to>
|
|
```
|
|
|
|
## Authentication
|
|
|
|
Finally, create an [authentication key](https://superuser.com/questions/390265/what-is-a-gpg-with-authenticate-capability-used-for).
|
|
|
|
GPG doesn't provide an authenticate-only key type, so select `(8) RSA (set your own capabilities)` and toggle the required capabilities until the only allowed action is `Authenticate`:
|
|
|
|
```console
|
|
gpg> addkey
|
|
Please select what kind of key you want:
|
|
(3) DSA (sign only)
|
|
(4) RSA (sign only)
|
|
(5) Elgamal (encrypt only)
|
|
(6) RSA (encrypt only)
|
|
(7) DSA (set your own capabilities)
|
|
(8) RSA (set your own capabilities)
|
|
(10) ECC (sign only)
|
|
(11) ECC (set your own capabilities)
|
|
(12) ECC (encrypt only)
|
|
(13) Existing key
|
|
Your selection? 8
|
|
|
|
Possible actions for a RSA key: Sign Encrypt Authenticate
|
|
Current allowed actions: Sign Encrypt
|
|
|
|
(S) Toggle the sign capability
|
|
(E) Toggle the encrypt capability
|
|
(A) Toggle the authenticate capability
|
|
(Q) Finished
|
|
|
|
Your selection? S
|
|
|
|
Possible actions for a RSA key: Sign Encrypt Authenticate
|
|
Current allowed actions: Encrypt
|
|
|
|
(S) Toggle the sign capability
|
|
(E) Toggle the encrypt capability
|
|
(A) Toggle the authenticate capability
|
|
(Q) Finished
|
|
|
|
Your selection? E
|
|
|
|
Possible actions for a RSA key: Sign Encrypt Authenticate
|
|
Current allowed actions:
|
|
|
|
(S) Toggle the sign capability
|
|
(E) Toggle the encrypt capability
|
|
(A) Toggle the authenticate capability
|
|
(Q) Finished
|
|
|
|
Your selection? A
|
|
|
|
Possible actions for a RSA key: Sign Encrypt Authenticate
|
|
Current allowed actions: Authenticate
|
|
|
|
(S) Toggle the sign capability
|
|
(E) Toggle the encrypt capability
|
|
(A) Toggle the authenticate capability
|
|
(Q) Finished
|
|
|
|
Your selection? Q
|
|
RSA keys may be between 1024 and 4096 bits long.
|
|
What keysize do you want? (2048) 4096
|
|
Requested keysize is 4096 bits
|
|
Please specify how long the key should be valid.
|
|
0 = key does not expire
|
|
<n> = key expires in n days
|
|
<n>w = key expires in n weeks
|
|
<n>m = key expires in n months
|
|
<n>y = key expires in n years
|
|
Key is valid for? (0) 1y
|
|
Key expires at Mon 10 Sep 2018 00:00:00 PM UTC
|
|
Is this correct? (y/N) y
|
|
Really create? (y/N) y
|
|
We need to generate a lot of random bytes. It is a good idea to perform
|
|
some other action (type on the keyboard, move the mouse, utilize the
|
|
disks) during the prime generation; this gives the random number
|
|
generator a better chance to gain enough entropy.
|
|
|
|
sec rsa4096/0xFF3E7D88647EBCDB
|
|
created: 2017-10-09 expires: never usage: C
|
|
trust: ultimate validity: ultimate
|
|
ssb rsa4096/0xBECFA3C1AE191D15
|
|
created: 2017-10-09 expires: 2018-10-09 usage: S
|
|
ssb rsa4096/0x5912A795E90DD2CF
|
|
created: 2017-10-09 expires: 2018-10-09 usage: E
|
|
ssb rsa4096/0x3F29127E79649A3D
|
|
created: 2017-10-09 expires: 2018-10-09 usage: A
|
|
[ultimate] (1). Dr Duh <doc@duh.to>
|
|
|
|
gpg> save
|
|
```
|
|
|
|
# Verify keys
|
|
|
|
List the generated secret keys and verify the output:
|
|
|
|
```console
|
|
$ gpg --list-secret-keys
|
|
/tmp.FLZC0xcM/pubring.kbx
|
|
-------------------------------------------------------------------------
|
|
sec rsa4096/0xFF3E7D88647EBCDB 2017-10-09 [C]
|
|
Key fingerprint = 011C E16B D45B 27A5 5BA8 776D FF3E 7D88 647E BCDB
|
|
uid Dr Duh <doc@duh.to>
|
|
ssb rsa4096/0xBECFA3C1AE191D15 2017-10-09 [S] [expires: 2018-10-09]
|
|
ssb rsa4096/0x5912A795E90DD2CF 2017-10-09 [E] [expires: 2018-10-09]
|
|
ssb rsa4096/0x3F29127E79649A3D 2017-10-09 [A] [expires: 2018-10-09]
|
|
```
|
|
|
|
**Optional** Add any additional identities or email addresses now using the `adduid` command.
|
|
|
|
To verify with OpenPGP key checks, use the automated [key best practice checker](https://riseup.net/en/security/message-security/openpgp/best-practices#openpgp-key-checks):
|
|
|
|
```console
|
|
$ sudo apt-get install hopenpgp-tools
|
|
|
|
$ gpg --export $KEYID | hokey lint
|
|
```
|
|
|
|
The output will display any problems with your key in red text. If everything is green, your key passes each of the tests. If it is red, your key has failed one of the tests.
|
|
|
|
> hokey may warn (orange text) about cross certification for the authentication key. GPG's [Signing Subkey Cross-Certification](https://gnupg.org/faq/subkey-cross-certify.html) documentation has more detail on cross certification, and gpg v2.2.1 notes "subkey <keyid> does not sign and so does not need to be cross-certified". hokey may also indicate a problem (red text) with `Key expiration times: []` on the primary key (see [Note #3](#notes) about not setting an expiry for the primary key).
|
|
|
|
# Export keys
|
|
|
|
The Master and subkeys will be encrypted with your passphrase when exported.
|
|
|
|
Save a copy of your keys:
|
|
|
|
```console
|
|
$ gpg --armor --export-secret-keys $KEYID > $GNUPGHOME/mastersub.key
|
|
|
|
$ gpg --armor --export-secret-subkeys $KEYID > $GNUPGHOME/sub.key
|
|
```
|
|
|
|
On Windows, note that using any extension other than `.gpg` or attempting IO redirection to a file will garble the secret key, making it impossible to import it again at a later date:
|
|
|
|
```console
|
|
$ gpg --armor --export-secret-keys $KEYID -o \path\to\dir\mastersub.gpg
|
|
|
|
$ gpg --armor --export-secret-subkeys $KEYID -o \path\to\dir\sub.gpg
|
|
```
|
|
|
|
# Backup keys
|
|
|
|
Once GPG keys are moved to YubiKey, they cannot be extracted again!
|
|
|
|
Make sure you have made an **encrypted** backup before proceeding. An encrypted USB drive or container can be made using [VeraCrypt](https://www.veracrypt.fr/en/Downloads.html).
|
|
|
|
Also consider using a [paper copy](https://www.jabberwocky.com/software/paperkey/) of the keys as an additional backup measure.
|
|
|
|
## Linux
|
|
|
|
Attach a USB disk and check its label:
|
|
|
|
```console
|
|
$ sudo dmesg | tail
|
|
scsi8 : usb-storage 2-1:1.0
|
|
usbcore: registered new interface driver usb-storage
|
|
scsi 8:0:0:0: USB 0: 0 ANSI: 6
|
|
sd 8:0:0:0: Attached scsi generic sg4 type 0
|
|
sd 8:0:0:0: [sde] 62980096 512-byte logical blocks: (32.2 GB/30.0 GiB)
|
|
sd 8:0:0:0: [sde] Write Protect is off
|
|
sd 8:0:0:0: [sde] Mode Sense: 43 00 00 00
|
|
sd 8:0:0:0: [sde] Attached SCSI removable disk
|
|
```
|
|
|
|
Check the size to make sure it's the right device:
|
|
|
|
```console
|
|
$ sudo fdisk -l /dev/sde
|
|
Disk /dev/sde: 30 GiB, 32245809152 bytes, 62980096 sectors
|
|
/dev/sde1 2048 62980095 62978048 30G 6 FAT16
|
|
```
|
|
|
|
Erase and create a new partition table:
|
|
|
|
```console
|
|
$ sudo fdisk /dev/sde
|
|
Welcome to fdisk (util-linux 2.25.2).
|
|
|
|
Command (m for help): o
|
|
Created a new DOS disklabel with disk identifier 0xeac7ee35.
|
|
|
|
Command (m for help): w
|
|
The partition table has been altered.
|
|
Calling ioctl() to re-read partition table.
|
|
Syncing disks.
|
|
```
|
|
|
|
Remove and reinsert the USB drive, then create a new partition, selecting defaults:
|
|
|
|
```console
|
|
$ sudo fdisk /dev/sde
|
|
Welcome to fdisk (util-linux 2.25.2).
|
|
|
|
Command (m for help): n
|
|
Partition type
|
|
p primary (0 primary, 0 extended, 4 free)
|
|
e extended (container for logical partitions)
|
|
Select (default p): p
|
|
Partition number (1-4, default 1): 1
|
|
First sector (2048-62980095, default 2048):
|
|
Last sector, +sectors or +size{K,M,G,T,P} (2048-62980095, default 62980095):
|
|
|
|
Created a new partition 1 of type 'Linux' and of size 30 GiB.
|
|
|
|
Command (m for help): w
|
|
The partition table has been altered.
|
|
Calling ioctl() to re-read partition table.
|
|
Syncing disks.
|
|
```
|
|
|
|
Use [LUKS](https://askubuntu.com/questions/97196/how-secure-is-an-encrypted-luks-filesystem) to encrypt the new partition:
|
|
|
|
```console
|
|
$ sudo cryptsetup luksFormat /dev/sde1
|
|
|
|
WARNING!
|
|
========
|
|
This will overwrite data on /dev/sde1 irrevocably.
|
|
|
|
Are you sure? (Type uppercase yes): YES
|
|
Enter passphrase:
|
|
Verify passphrase:
|
|
```
|
|
|
|
Mount the partition:
|
|
|
|
```console
|
|
$ sudo cryptsetup luksOpen /dev/sde1 usb
|
|
Enter passphrase for /dev/sde1:
|
|
```
|
|
|
|
Create a filesystem:
|
|
|
|
```console
|
|
$ sudo mkfs.ext4 /dev/mapper/usb -L usb
|
|
mke2fs 1.43.4 (31-Jan-2017)
|
|
Creating filesystem with 7871744 4k blocks and 1970416 inodes
|
|
Superblock backups stored on blocks:
|
|
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
|
|
4096000
|
|
|
|
Allocating group tables: done
|
|
Writing inode tables: done
|
|
Creating journal (32768 blocks): done
|
|
Writing superblocks and filesystem accounting information: done
|
|
```
|
|
|
|
Mount the filesystem and copy the temporary GNUPG directory:
|
|
|
|
```console
|
|
$ sudo mkdir /mnt/encrypted-usb
|
|
|
|
$ sudo mount /dev/mapper/usb /mnt/encrypted-usb
|
|
|
|
$ sudo cp -avi $GNUPGHOME /mnt/encrypted-usb
|
|
```
|
|
|
|
Keep the backup mounted if you plan on setting up two or more keys as `keytocard` **will [delete](https://lists.gnupg.org/pipermail/gnupg-users/2016-July/056353.html) the local copy** on save.
|
|
|
|
Otherwise, unmount and disconnected the encrypted USB disk:
|
|
|
|
```console
|
|
$ sudo umount /mnt
|
|
|
|
$ sudo cryptsetup luksClose usb
|
|
```
|
|
|
|
## OpenBSD
|
|
|
|
Attach a USB disk and determine its label:
|
|
|
|
```console
|
|
$ dmesg | grep sd.\ at
|
|
sd2 at scsibus5 targ 1 lun 0: <Samsung, Flash Drive DUO, 1100> SCSI4 0/direct removable serial.50010000000000000001
|
|
```
|
|
|
|
Print the existing partitions to make sure it's the right device:
|
|
|
|
```console
|
|
$ doas disklabel -h sd2
|
|
```
|
|
|
|
Initialize the disk by creating an `a` partition with FS type `RAID`:
|
|
|
|
```console
|
|
$ doas fdisk -iy sd2
|
|
Writing MBR at offset 0.
|
|
|
|
$ doas disklabel -E sd2
|
|
Label editor (enter '?' for help at any prompt)
|
|
> a a
|
|
offset: [64]
|
|
size: [62653436]
|
|
FS type: [4.2BSD] RAID
|
|
> w
|
|
> q
|
|
No label changes.
|
|
|
|
$ doas bioctl -c C -l sd2a softraid0
|
|
New passphrase:
|
|
Re-type passphrase:
|
|
softraid0: CRYPTO volume attached as sd3
|
|
```
|
|
|
|
Make an `i` partition, then make and mount the filesystem:
|
|
|
|
```console
|
|
$ doas fdisk -iy sd3
|
|
Writing MBR at offset 0.
|
|
|
|
$ doas disklabel -E sd3
|
|
Label editor (enter '?' for help at any prompt)
|
|
> a i
|
|
offset: [64]
|
|
size: [62637371]
|
|
FS type: [4.2BSD]
|
|
> w
|
|
> q
|
|
No label changes.
|
|
|
|
$ doas newfs sd3i
|
|
/dev/rsd3i: 30584.6MB in 62637344 sectors of 512 bytes
|
|
152 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
|
|
super-block backups (for fsck -b #) at:
|
|
32, 414688, 829344, 1244000, 1658656, 2073312, 2487968, 2902624, 3317280, 3731936, 4146592, 4561248, 4975904,
|
|
[...]
|
|
```
|
|
|
|
Mount the filesystem and copy the temporary GNUPG directory:
|
|
|
|
```console
|
|
$ doas mkdir /mnt/encrypted-usb
|
|
|
|
$ doas mount /dev/sd3i /mnt/encrypted-usb
|
|
|
|
$ doas cp -avi $GNUPGHOME /mnt/encrypted-usb
|
|
```
|
|
|
|
Keep the backup mounted if you plan on setting up two or more keys as `keytocard` **will [delete](https://lists.gnupg.org/pipermail/gnupg-users/2016-July/056353.html) the local copy** on save.
|
|
|
|
Otherwise, unmount and disconnected the encrypted USB disk:
|
|
|
|
```console
|
|
$ doas umount /mnt/encrypted-usb
|
|
|
|
$ doas bioctl -d sd3
|
|
```
|
|
|
|
See [OpenBSD FAQ#14](https://www.openbsd.org/faq/faq14.html#softraidCrypto) for more information.
|
|
|
|
# Configure YubiKey
|
|
|
|
**Note** YubiKey NEO shipped after November 2015 have [all modes enabled](https://www.yubico.com/support/knowledge-base/categories/articles/yubikey-neo-manager/); so this step may be skipped. Older versions of the YubiKey NEO may need to be reconfigured as a composite USB device (HID + CCID) which allows OTPs to be emitted while in use as a SmartCard.
|
|
Plug in YubiKey and configure it with the `ykpersonalize` utility:
|
|
|
|
```console
|
|
$ sudo ykpersonalize -m82
|
|
Firmware version 4.3.7 Touch level 527 Program sequence 1
|
|
|
|
The USB mode will be set to: 0x82
|
|
|
|
Commit? (y/n) [n]: y
|
|
```
|
|
|
|
The -m option is the mode command. To see the different modes, enter `ykpersonalize -help`. Mode 82 (in hex) enables the YubiKey NEO as a composite USB device (HID + CCID). Once you have changed the mode, you need to re-boot the YubiKey, so remove and re-insert it. On YubiKey NEO with firmware version 3.3 or higher, you can enable composite USB device with `-m86` instead of `-m82`.
|
|
|
|
**Windows** Use the [YubiKey NEO Manager](https://www.yubico.com/products/services-software/download/yubikey-neo-manager/) to enable CCID functionality.
|
|
|
|
# Configure Smartcard
|
|
|
|
Use GPG to configure YubiKey as a smartcard:
|
|
|
|
```console
|
|
$ gpg --card-edit
|
|
Reader ...........: Yubico Yubikey 4 OTP U2F CCID
|
|
Application ID ...: D2760001240102010006055532110000
|
|
Version ..........: 2.1
|
|
Manufacturer .....: Yubico
|
|
Serial number ....: 05553211
|
|
Name of cardholder: [not set]
|
|
Language prefs ...: [not set]
|
|
Sex ..............: unspecified
|
|
URL of public key : [not set]
|
|
Login data .......: [not set]
|
|
Signature PIN ....: not forced
|
|
Key attributes ...: rsa2048 rsa2048 rsa2048
|
|
Max. PIN lengths .: 127 127 127
|
|
PIN retry counter : 3 0 3
|
|
Signature counter : 0
|
|
Signature key ....: [none]
|
|
Encryption key....: [none]
|
|
Authentication key: [none]
|
|
General key info..: [none]
|
|
```
|
|
|
|
## Change PIN
|
|
|
|
The default PIN is `123456` and default Admin PIN (PUK) is `12345678`. CCID-mode PINs can be up to 127 ASCII characters long.
|
|
|
|
The Admin PIN is required for some card operations and to unblock a PIN that has been entered incorrectly more than three times. See the GnuPG documentation on [Managing PINs](https://www.gnupg.org/howtos/card-howto/en/ch03s02.html) for details.
|
|
|
|
```console
|
|
gpg/card> admin
|
|
Admin commands are allowed
|
|
|
|
gpg/card> passwd
|
|
gpg: OpenPGP card no. D2760001240102010006055532110000 detected
|
|
|
|
1 - change PIN
|
|
2 - unblock PIN
|
|
3 - change Admin PIN
|
|
4 - set the Reset Code
|
|
Q - quit
|
|
|
|
Your selection? 3
|
|
PIN changed.
|
|
|
|
1 - change PIN
|
|
2 - unblock PIN
|
|
3 - change Admin PIN
|
|
4 - set the Reset Code
|
|
Q - quit
|
|
|
|
Your selection? 1
|
|
PIN changed.
|
|
|
|
1 - change PIN
|
|
2 - unblock PIN
|
|
3 - change Admin PIN
|
|
4 - set the Reset Code
|
|
Q - quit
|
|
|
|
Your selection? q
|
|
```
|
|
|
|
## Set information
|
|
|
|
Some fields are optional.
|
|
|
|
```console
|
|
gpg/card> name
|
|
Cardholder's surname: Duh
|
|
Cardholder's given name: Dr
|
|
|
|
gpg/card> lang
|
|
Language preferences: en
|
|
|
|
gpg/card> login
|
|
Login data (account name): doc@duh.to
|
|
|
|
gpg/card> [Press Enter]
|
|
|
|
Application ID ...: D2760001240102010006055532110000
|
|
Version ..........: 2.1
|
|
Manufacturer .....: unknown
|
|
Serial number ....: 05553211
|
|
Name of cardholder: Dr Duh
|
|
Language prefs ...: en
|
|
Sex ..............: unspecified
|
|
URL of public key : [not set]
|
|
Login data .......: doc@duh.to
|
|
Private DO 4 .....: [not set]
|
|
Signature PIN ....: not forced
|
|
Key attributes ...: 2048R 2048R 2048R
|
|
Max. PIN lengths .: 127 127 127
|
|
PIN retry counter : 3 0 3
|
|
Signature counter : 0
|
|
Signature key ....: [none]
|
|
Encryption key....: [none]
|
|
Authentication key: [none]
|
|
General key info..: [none]
|
|
|
|
gpg/card> quit
|
|
```
|
|
|
|
# Transfer keys
|
|
|
|
**Important** Transferring keys to YubiKey using `keytocard` is a destructive, one-way operation only. Make sure you've made a backup before proceeding: `keytocard` converts the local, on-disk key into a stub, which means the on-disk copy is no longer usable to transfer to subsequent security key devices or mint additional keys.
|
|
|
|
Previous GPG versions required the `toggle` command before selecting keys. The currently selected key(s) are indicated with an `*`. When moving keys only one key should be selected at a time.
|
|
|
|
```console
|
|
$ gpg --edit-key $KEYID
|
|
|
|
Secret key is available.
|
|
|
|
sec rsa4096/0xFF3E7D88647EBCDB
|
|
created: 2017-10-09 expires: never usage: C
|
|
trust: ultimate validity: ultimate
|
|
ssb rsa4096/0xBECFA3C1AE191D15
|
|
created: 2017-10-09 expires: 2018-10-09 usage: S
|
|
ssb rsa4096/0x5912A795E90DD2CF
|
|
created: 2017-10-09 expires: 2018-10-09 usage: E
|
|
ssb rsa4096/0x3F29127E79649A3D
|
|
created: 2017-10-09 expires: 2018-10-09 usage: A
|
|
[ultimate] (1). Dr Duh <doc@duh.to>
|
|
```
|
|
|
|
## Signing
|
|
|
|
Select and move the signature key. You will be prompted for the key passphrase and Admin PIN.
|
|
|
|
```console
|
|
gpg> key 1
|
|
|
|
sec rsa4096/0xFF3E7D88647EBCDB
|
|
created: 2017-10-09 expires: never usage: C
|
|
trust: ultimate validity: ultimate
|
|
ssb* rsa4096/0xBECFA3C1AE191D15
|
|
created: 2017-10-09 expires: 2018-10-09 usage: S
|
|
ssb rsa4096/0x5912A795E90DD2CF
|
|
created: 2017-10-09 expires: 2018-10-09 usage: E
|
|
ssb rsa4096/0x3F29127E79649A3D
|
|
created: 2017-10-09 expires: 2018-10-09 usage: A
|
|
[ultimate] (1). Dr Duh <doc@duh.to>
|
|
|
|
gpg> keytocard
|
|
Please select where to store the key:
|
|
(1) Signature key
|
|
(3) Authentication key
|
|
Your selection? 1
|
|
|
|
You need a passphrase to unlock the secret key for
|
|
user: "Dr Duh <doc@duh.to>"
|
|
4096-bit RSA key, ID 0xBECFA3C1AE191D15, created 2016-05-24
|
|
```
|
|
|
|
## Encryption
|
|
|
|
Type `key 1` again to de-select and `key 2` to select the next key:
|
|
|
|
```console
|
|
gpg> key 1
|
|
|
|
gpg> key 2
|
|
|
|
sec rsa4096/0xFF3E7D88647EBCDB
|
|
created: 2017-10-09 expires: never usage: C
|
|
trust: ultimate validity: ultimate
|
|
ssb rsa4096/0xBECFA3C1AE191D15
|
|
created: 2017-10-09 expires: 2018-10-09 usage: S
|
|
ssb* rsa4096/0x5912A795E90DD2CF
|
|
created: 2017-10-09 expires: 2018-10-09 usage: E
|
|
ssb rsa4096/0x3F29127E79649A3D
|
|
created: 2017-10-09 expires: 2018-10-09 usage: A
|
|
[ultimate] (1). Dr Duh <doc@duh.to>
|
|
|
|
gpg> keytocard
|
|
Please select where to store the key:
|
|
(2) Encryption key
|
|
Your selection? 2
|
|
|
|
[...]
|
|
```
|
|
|
|
## Authentication
|
|
|
|
Type `key 2` again to deselect and `key 3` to select the last key:
|
|
|
|
```console
|
|
gpg> key 2
|
|
|
|
gpg> key 3
|
|
|
|
sec rsa4096/0xFF3E7D88647EBCDB
|
|
created: 2017-10-09 expires: never usage: C
|
|
trust: ultimate validity: ultimate
|
|
ssb rsa4096/0xBECFA3C1AE191D15
|
|
created: 2017-10-09 expires: 2018-10-09 usage: S
|
|
ssb rsa4096/0x5912A795E90DD2CF
|
|
created: 2017-10-09 expires: 2018-10-09 usage: E
|
|
ssb* rsa4096/0x3F29127E79649A3D
|
|
created: 2017-10-09 expires: 2018-10-09 usage: A
|
|
[ultimate] (1). Dr Duh <doc@duh.to>
|
|
|
|
gpg> keytocard
|
|
Please select where to store the key:
|
|
(3) Authentication key
|
|
Your selection? 3
|
|
|
|
gpg> save
|
|
```
|
|
|
|
# Verify card
|
|
|
|
Verify the subkeys have moved to YubiKey as indicated by `ssb>`:
|
|
|
|
```console
|
|
$ gpg --list-secret-keys
|
|
/tmp.FLZC0xcM/pubring.kbx
|
|
-------------------------------------------------------------------------
|
|
sec rsa4096/0xFF3E7D88647EBCDB 2017-10-09 [C]
|
|
Key fingerprint = 011C E16B D45B 27A5 5BA8 776D FF3E 7D88 647E BCDB
|
|
uid Dr Duh <doc@duh.to>
|
|
ssb> rsa4096/0xBECFA3C1AE191D15 2017-10-09 [S] [expires: 2018-10-09]
|
|
ssb> rsa4096/0x5912A795E90DD2CF 2017-10-09 [E] [expires: 2018-10-09]
|
|
ssb> rsa4096/0x3F29127E79649A3D 2017-10-09 [A] [expires: 2018-10-09]
|
|
```
|
|
|
|
# Export public key
|
|
|
|
Mount another USB disk to copy the *public* key, or save it somewhere where it can be easily accessed later.
|
|
|
|
**Important** Without importing the *public* key, you will not be able to use GPG to encrypt, decrypt, nor sign messages. However, you will still be able to use YubiKey for SSH authentication.
|
|
|
|
```console
|
|
$ gpg --armor --export $KEYID > /mnt/public-usb-key/pubkey.txt
|
|
```
|
|
|
|
Windows:
|
|
|
|
```console
|
|
$ gpg --armor --export $KEYID -o \path\to\dir\pubkey.gpg
|
|
```
|
|
|
|
**Optional** Upload the public key to a [public keyserver](https://debian-administration.org/article/451/Submitting_your_GPG_key_to_a_keyserver):
|
|
|
|
```console
|
|
$ gpg --send-key $KEYID
|
|
|
|
$ gpg --keyserver pgp.mit.edu --send-key $KEYID
|
|
|
|
$ gpg --keyserver keys.gnupg.net --send-key $KEYID
|
|
```
|
|
|
|
After some time, the public key will to propagate to [other](https://pgp.key-server.io/pks/lookup?search=doc%40duh.to&fingerprint=on&op=vindex) [servers](https://pgp.mit.edu/pks/lookup?search=doc%40duh.to&op=index).
|
|
|
|
# Cleanup
|
|
|
|
Ensure you have:
|
|
|
|
* Saved the Encryption, Signing and Authentication subkeys to YubiKey.
|
|
* Saved the YubiKey PINs which you changed from defaults.
|
|
* Saved the password to the Master key.
|
|
* Saved a copy of the Master key, subkeys and revocation certificates on an encrypted volume stored offline.
|
|
* Saved the password to that encrypted volume in a separate location.
|
|
* Saved a copy of the public key somewhere easily accessible later.
|
|
|
|
Reboot or [securely delete](http://srm.sourceforge.net/) `$GNUPGHOME` and remove the secret keys from the GPG keyring:
|
|
|
|
```console
|
|
$ sudo srm -r $GNUPGHOME || sudo rm -rf $GNUPGHOME
|
|
|
|
$ gpg --delete-secret-key $KEYID
|
|
```
|
|
|
|
**Important** Make sure you have securely erased all generated keys and revocation certificates if a Live image was not used!
|
|
|
|
# Using keys
|
|
|
|
You can reboot back into the Live image to test YubiKey.
|
|
|
|
Install required programs:
|
|
|
|
```console
|
|
$ sudo apt-get update
|
|
|
|
$ sudo apt-get install -y \
|
|
curl gnupg2 gnupg-agent \
|
|
cryptsetup scdaemon pcscd
|
|
```
|
|
|
|
Download [drduh/config/gpg.conf](https://github.com/drduh/config/blob/master/gpg.conf):
|
|
|
|
```console
|
|
$ mkdir ~/.gnupg ; curl -o ~/.gnupg/gpg.conf https://raw.githubusercontent.com/drduh/config/master/gpg.conf
|
|
|
|
$ chmod 600 ~/.gnupg/gpg.conf
|
|
```
|
|
|
|
# Import public key
|
|
|
|
To import the public key from a file on an encrypted USB disk:
|
|
|
|
```console
|
|
$ sudo cryptsetup luksOpen /dev/sdd1 usb
|
|
Enter passphrase for /dev/sdd1:
|
|
|
|
$ sudo mount /dev/mapper/usb /mnt
|
|
|
|
$ gpg --import /mnt/pubkey.txt
|
|
gpg: key 0xFF3E7D88647EBCDB: public key "Dr Duh <doc@duh.to>" imported
|
|
gpg: Total number processed: 1
|
|
gpg: imported: 1
|
|
```
|
|
|
|
To download the public key from a keyserver:
|
|
|
|
```console
|
|
$ gpg --recv $KEYID
|
|
gpg: requesting key 0xFF3E7D88647EBCDB from hkps server hkps.pool.sks-keyservers.net
|
|
[...]
|
|
gpg: key 0xFF3E7D88647EBCDB: public key "Dr Duh <doc@duh.to>" imported
|
|
gpg: Total number processed: 1
|
|
gpg: imported: 1
|
|
```
|
|
|
|
If you get the error `gpgkeys: HTTP fetch error 1: unsupported protocol` - this means you need to install a special version of curl which supports GPG:
|
|
|
|
```console
|
|
$ sudo apt-get install -y gnupg-curl
|
|
```
|
|
|
|
## Trust master key
|
|
|
|
Edit the Master key to assign it ultimate trust by selecting `trust` then option `5`:
|
|
|
|
```console
|
|
$ gpg --edit-key $KEYID
|
|
|
|
Secret key is available.
|
|
|
|
gpg> trust
|
|
pub 4096R/0xFF3E7D88647EBCDB created: 2016-05-24 expires: never usage: C
|
|
trust: unknown validity: unknown
|
|
sub 4096R/0xBECFA3C1AE191D15 created: 2017-10-09 expires: 2018-10-09 usage: S
|
|
sub 4096R/0x5912A795E90DD2CF created: 2017-10-09 expires: 2018-10-09 usage: E
|
|
sub 4096R/0x3F29127E79649A3D created: 2017-10-09 expires: 2018-10-09 usage: A
|
|
[ unknown] (1). Dr Duh <doc@duh.to>
|
|
|
|
Please decide how far you trust this user to correctly verify other users' keys
|
|
(by looking at passports, checking fingerprints from different sources, etc.)
|
|
|
|
1 = I don't know or won't say
|
|
2 = I do NOT trust
|
|
3 = I trust marginally
|
|
4 = I trust fully
|
|
5 = I trust ultimately
|
|
m = back to the main menu
|
|
|
|
Your decision? 5
|
|
Do you really want to set this key to ultimate trust? (y/N) y
|
|
|
|
pub 4096R/0xFF3E7D88647EBCDB created: 2016-05-24 expires: never usage: C
|
|
trust: ultimate validity: unknown
|
|
sub 4096R/0xBECFA3C1AE191D15 created: 2017-10-09 expires: 2018-10-09 usage: S
|
|
sub 4096R/0x5912A795E90DD2CF created: 2017-10-09 expires: 2018-10-09 usage: E
|
|
sub 4096R/0x3F29127E79649A3D created: 2017-10-09 expires: 2018-10-09 usage: A
|
|
[ unknown] (1). Dr Duh <doc@duh.to>
|
|
|
|
gpg> save
|
|
```
|
|
|
|
# Insert YubiKey
|
|
|
|
Re-connect YubiKey and check the status:
|
|
|
|
```console
|
|
$ gpg --card-status
|
|
Application ID ...: D2760001240102010006055532110000
|
|
Version ..........: 2.1
|
|
Manufacturer .....: Yubico
|
|
Serial number ....: 05553211
|
|
Name of cardholder: Dr Duh
|
|
Language prefs ...: en
|
|
Sex ..............: unspecified
|
|
URL of public key : [not set]
|
|
Login data .......: doc@duh.to
|
|
Signature PIN ....: not forced
|
|
Key attributes ...: 4096R 4096R 4096R
|
|
Max. PIN lengths .: 127 127 127
|
|
PIN retry counter : 3 3 3
|
|
Signature counter : 0
|
|
Signature key ....: 07AA 7735 E502 C5EB E09E B8B0 BECF A3C1 AE19 1D15
|
|
created ....: 2016-05-24 23:22:01
|
|
Encryption key....: 6F26 6F46 845B BEB8 BDF3 7E9B 5912 A795 E90D D2CF
|
|
created ....: 2016-05-24 23:29:03
|
|
Authentication key: 82BE 7837 6A3F 2E7B E556 5E35 3F29 127E 7964 9A3D
|
|
created ....: 2016-05-24 23:36:40
|
|
General key info..: pub 4096R/0xBECFA3C1AE191D15 2016-05-24 Dr Duh <doc@duh.to>
|
|
sec# 4096R/0xFF3E7D88647EBCDB created: 2016-05-24 expires: never
|
|
ssb> 4096R/0xBECFA3C1AE191D15 created: 2017-10-09 expires: 2018-10-09
|
|
card-no: 0006 05553211
|
|
ssb> 4096R/0x5912A795E90DD2CF created: 2017-10-09 expires: 2018-10-09
|
|
card-no: 0006 05553211
|
|
ssb> 4096R/0x3F29127E79649A3D created: 2017-10-09 expires: 2018-10-09
|
|
card-no: 0006 05553211
|
|
```
|
|
|
|
`sec#` indicates master key is not available (as it should be stored encrypted offline).
|
|
|
|
**Note** If you see `General key info..: [none]` in the output instead - go back and import the public key using the previous step.
|
|
|
|
# Encryption
|
|
|
|
```console
|
|
$ echo "test message string" | gpg --encrypt --armor --recipient $KEYID
|
|
-----BEGIN PGP MESSAGE-----
|
|
|
|
hQIMA1kSp5XpDdLPAQ/+JyYfLaUS/+llEzQaKDb5mWhG4HlUgD99dNJUXakm085h
|
|
PSSt3I8Ac0ctwyMnenZvBEbHMqdRnfZJsj5pHidKcAZrhgs+he+B1tdZ/KPa8inx
|
|
NIGqd8W1OraVSFmPEdC1kQ5he6R/WCDH1NNel9+fvLtQDCBQaFae/s3yXCSSQU6q
|
|
HKCJLyHK8K9hDvgFmXOY8j1qTknBvDbmYdcCKVE1ejgpUCi3WatusobpWozsp0+b
|
|
6DN8bXyfxLPYm1PTLfW7v4kwddktB8eVioV8A45lndJZvliSqDwxhrwyE5VGsArS
|
|
NmqzBkCaOHQFr0ofL91xgwpCI5kM2ukIR5SxUO4hvzlHn58QVL9GfAyCHMFtJs3o
|
|
Q9eiR0joo9TjTwR8XomVhRJShrrcPeGgu3YmIak4u7OndyBFpu2E79RQ0ehpl2gY
|
|
tSECB6mNd/gt0Wy3y15ccaFI4CVP6jrMN6q3YhXqNC7GgI/OWkVZIAgUFYnbmIQe
|
|
tQ3z3wlbvFFngeFy5IlhsPduK8T9XgPnOtgQxHaepKz0h3m2lJegmp4YZ4CbS9h6
|
|
kcBTUjys5Vin1SLuqL4PhErzmlAZgVzG2PANsnHYPe2hwN4NlFtOND1wgBCtBFBs
|
|
1pqz1I0O+jmyId+jVlAK076c2AwdkVbokKUcIT/OcTc0nwHjOUttJGmkUHlbt/nS
|
|
iAFNniSfzf6fwAFHgsvWiRJMa3keolPiqoUdh0tBIiI1zxOMaiTL7C9BFdpnvzYw
|
|
Krj0pDc7AlF4spWhm58WgAW20P8PGcVQcN6mSTG8jKbXVSP3bvgPXkpGAOLKMV/i
|
|
pLORcRPbauusBqovgaBWU/i3pMYrbhZ+LQbVEaJlvblWu6xe8HhS/jo=
|
|
=pzkv
|
|
-----END PGP MESSAGE-----
|
|
```
|
|
|
|
To encrypt to multiple recipients (or to multiple keys):
|
|
|
|
```console
|
|
$ echo "test message string" | gpg --encrypt --armor --recipient $KEYID_0 --recipient $KEYID_1 --recipient $KEYID_2
|
|
-----BEGIN PGP MESSAGE-----
|
|
[...]
|
|
```
|
|
|
|
# Decryption
|
|
|
|
```console
|
|
$ gpg --decrypt --armor
|
|
-----BEGIN PGP MESSAGE-----
|
|
|
|
hQIMA1kSp5XpDdLPAQ/+JyYfLaUS/+llEzQaKDb5mWhG4HlUgD99dNJUXakm085h
|
|
PSSt3I8Ac0ctwyMnenZvBEbHMqdRnfZJsj5pHidKcAZrhgs+he+B1tdZ/KPa8inx
|
|
NIGqd8W1OraVSFmPEdC1kQ5he6R/WCDH1NNel9+fvLtQDCBQaFae/s3yXCSSQU6q
|
|
HKCJLyHK8K9hDvgFmXOY8j1qTknBvDbmYdcCKVE1ejgpUCi3WatusobpWozsp0+b
|
|
6DN8bXyfxLPYm1PTLfW7v4kwddktB8eVioV8A45lndJZvliSqDwxhrwyE5VGsArS
|
|
NmqzBkCaOHQFr0ofL91xgwpCI5kM2ukIR5SxUO4hvzlHn58QVL9GfAyCHMFtJs3o
|
|
Q9eiR0joo9TjTwR8XomVhRJShrrcPeGgu3YmIak4u7OndyBFpu2E79RQ0ehpl2gY
|
|
tSECB6mNd/gt0Wy3y15ccaFI4CVP6jrMN6q3YhXqNC7GgI/OWkVZIAgUFYnbmIQe
|
|
tQ3z3wlbvFFngeFy5IlhsPduK8T9XgPnOtgQxHaepKz0h3m2lJegmp4YZ4CbS9h6
|
|
kcBTUjys5Vin1SLuqL4PhErzmlAZgVzG2PANsnHYPe2hwN4NlFtOND1wgBCtBFBs
|
|
1pqz1I0O+jmyId+jVlAK076c2AwdkVbokKUcIT/OcTc0nwHjOUttJGmkUHlbt/nS
|
|
iAFNniSfzf6fwAFHgsvWiRJMa3keolPiqoUdh0tBIiI1zxOMaiTL7C9BFdpnvzYw
|
|
Krj0pDc7AlF4spWhm58WgAW20P8PGcVQcN6mSTG8jKbXVSP3bvgPXkpGAOLKMV/i
|
|
pLORcRPbauusBqovgaBWU/i3pMYrbhZ+LQbVEaJlvblWu6xe8HhS/jo=
|
|
=pzkv
|
|
-----END PGP MESSAGE-----
|
|
gpg: encrypted with 4096-bit RSA key, ID 0x5912A795E90DD2CF, created
|
|
2016-05-24
|
|
"Dr Duh <doc@duh.to>"
|
|
|
|
[Press Control-D]
|
|
|
|
test message string
|
|
```
|
|
|
|
# Signing
|
|
|
|
```console
|
|
$ echo "test message string" | gpg --armor --clearsign --default-key 0xBECFA3C1AE191D15
|
|
-----BEGIN PGP SIGNED MESSAGE-----
|
|
Hash: SHA512
|
|
|
|
test message string
|
|
-----BEGIN PGP SIGNATURE-----
|
|
|
|
iQIcBAEBCgAGBQJXRPo8AAoJEL7Po8GuGR0Vh8wP/jYXTR8SAZIZSMVCOyAjH37f
|
|
k6JxB0rF928WDYPihjo/d0Jd+XpoV1g+oipDRjP78xqR9H/CJZlE10IPQbNaomFs
|
|
+3RGxA3Zr085cVFoixI8rxYOSu0Vs2cAzAbJHNcOcD7vXxTHcX4T8kfKoF9A4U1u
|
|
XTJ42eEjpO0fX76tFX2/Uzxl43ES0dO7Y82ho7xcnaYwakVUEcWfUpfDAroLKZOs
|
|
wCZGr8Z64QDQzxQ9L45Zc61wMx9JEIWD4BnagllfeOYrEwTJfYG8uhDDNYx0jjJp
|
|
j1PBHn5d556aX6DHUH05kq3wszvQ4W40RctLgAA3l1VnEKebhBKjLZA/EePAvQV4
|
|
QM7MFUV1X/pi2zlyoZSnHkVl8b5Q7RU5ZtRpq9fdkDDepeiUo5PNBUMJER1gn4bm
|
|
ri8DtavkwTNWBRLnVR2gHBmVQNN7ZDOkHcfyqR4I9chx6TMpfcxk0zATAHh8Donp
|
|
FVPKySifuXpunn+0MwdZl5XkhHGdpdYQz4/LAZUGhrA9JTnFtc4cl4JrTzufF8Sr
|
|
c3JJumMsyGvw9OQKQHF8gHme4PBu/4P31LpfX9wzPOTpJaI31Sg5kdJLTo9M9Ppo
|
|
uvkmJS7ETjLQZOsRyAEn7gcEKZQGPQcNAgfEgQPoepS/KvvI68u+JMJm4n24k2kQ
|
|
fEkp501u8kAZkWauhiL+
|
|
=+ylJ
|
|
-----END PGP SIGNATURE-----
|
|
```
|
|
|
|
# Verifying signature
|
|
|
|
```console
|
|
$ gpg
|
|
gpg: Go ahead and type your message ...
|
|
-----BEGIN PGP SIGNED MESSAGE-----
|
|
Hash: SHA512
|
|
|
|
test message string
|
|
-----BEGIN PGP SIGNATURE-----
|
|
|
|
iQIcBAEBCgAGBQJXRPo8AAoJEL7Po8GuGR0Vh8wP/jYXTR8SAZIZSMVCOyAjH37f
|
|
+3RGxA3Zr085cVFoixI8rxYOSu0Vs2cAzAbJHNcOcD7vXxTHcX4T8kfKoF9A4U1u
|
|
XTJ42eEjpO0fX76tFX2/Uzxl43ES0dO7Y82ho7xcnaYwakVUEcWfUpfDAroLKZOs
|
|
wCZGr8Z64QDQzxQ9L45Zc61wMx9JEIWD4BnagllfeOYrEwTJfYG8uhDDNYx0jjJp
|
|
j1PBHn5d556aX6DHUH05kq3wszvQ4W40RctLgAA3l1VnEKebhBKjLZA/EePAvQV4
|
|
QM7MFUV1X/pi2zlyoZSnHkVl8b5Q7RU5ZtRpq9fdkDDepeiUo5PNBUMJER1gn4bm
|
|
ri8DtavkwTNWBRLnVR2gHBmVQNN7ZDOkHcfyqR4I9chx6TMpfcxk0zATAHh8Donp
|
|
FVPKySifuXpunn+0MwdZl5XkhHGdpdYQz4/LAZUGhrA9JTnFtc4cl4JrTzufF8Sr
|
|
c3JJumMsyGvw9OQKQHF8gHme4PBu/4P31LpfX9wzPOTpJaI31Sg5kdJLTo9M9Ppo
|
|
uvkmJS7ETjLQZOsRyAEn7gcEKZQGPQcNAgfEgQPoepS/KvvI68u+JMJm4n24k2kQ
|
|
fEkp501u8kAZkWauhiL+
|
|
=+ylJ
|
|
-----END PGP SIGNATURE-----
|
|
|
|
[Press Control-D]
|
|
|
|
gpg: Signature made Wed 25 May 2016 00:00:00 AM UTC
|
|
gpg: using RSA key 0xBECFA3C1AE191D15
|
|
gpg: Good signature from "Dr Duh <doc@duh.to>" [ultimate]
|
|
Primary key fingerprint: 011C E16B D45B 27A5 5BA8 776D FF3E 7D88 647E BCDB
|
|
Subkey fingerprint: 07AA 7735 E502 C5EB E09E B8B0 BECF A3C1 AE19 1D15
|
|
```
|
|
|
|
# SSH
|
|
|
|
[gpg-agent](https://wiki.archlinux.org/index.php/GnuPG#SSH_agent) supports the OpenSSH ssh-agent protocol (`enable-ssh-support`), as well as Putty's Pageant on Windows (`enable-putty-support`). This means it can be used instead of the traditional ssh-agent / pageant. There are some differences from ssh-agent, notably that gpg-agent does not _cache_ keys rather it converts, encrypts and stores them - persistently - as GPG keys and then makes them available to ssh clients. Any existing ssh private keys that you'd like to keep in `gpg-agent` should be deleted after they've been imported to the GPG agent.
|
|
|
|
When importing the key to `gpg-agent`, you'll be prompted for a passphrase to protect that key within GPG's key store - you may want to use the same passphrase as the original's ssh version. GPG can both cache passphrases for a determined period (ref. `gpg-agent`'s various `cache-ttl` options), and since version 2.1 can store and fetch passphrases via the macOS keychain. Note than when removing the old private key after importing to `gpg-agent`, keep the `.pub` key file around for use in specifying ssh identities (e.g. `ssh -i /path/to/identity.pub`).
|
|
|
|
Probably the biggest thing missing from `gpg-agent`'s ssh agent support is being able to remove keys. `ssh-add -d/-D` have no effect. Instead, you need to use the `gpg-connect-agent` utility to lookup a key's keygrip, match that with the desired ssh key fingerprint (as an MD5) and then delete that keygrip. The [gnupg-users mailing list](https://lists.gnupg.org/pipermail/gnupg-users/2016-August/056499.html) has more information.
|
|
|
|
## Create configuration
|
|
|
|
Create a hardened configuration for gpg-agent by downloading [drduh/config/gpg-agent.conf](https://github.com/drduh/config/blob/master/gpg-agent.conf):
|
|
|
|
```console
|
|
$ curl -o ~/.gnupg/gpg-agent.conf https://raw.githubusercontent.com/drduh/config/master/gpg-agent.conf
|
|
|
|
$ cat ~/.gnupg/gpg-agent.conf
|
|
enable-ssh-support
|
|
pinentry-program /usr/bin/pinentry-curses
|
|
default-cache-ttl 60
|
|
max-cache-ttl 120
|
|
```
|
|
|
|
Alternatively, you may want to use `/usr/bin/pinentry-gnome3` to use a GUI manager. On macOS, use `brew install pinentry-mac` and adjust the program path to suit.
|
|
|
|
## Replace agents
|
|
|
|
To launch `gpg-agent` for use by SSH, use the `gpg-connect-agent /bye` or `gpgconf --launch gpg-agent` commands.
|
|
|
|
Add these to the shell `rc` file:
|
|
|
|
```console
|
|
export GPG_TTY="$(tty)"
|
|
export SSH_AUTH_SOCK="/run/user/$UID/gnupg/S.gpg-agent.ssh"
|
|
gpg-connect-agent updatestartuptty /bye
|
|
```
|
|
|
|
On some systems, you may need to use the following instead:
|
|
|
|
```console
|
|
export GPG_TTY="$(tty)"
|
|
export SSH_AUTH_SOCK=$(gpgconf --list-dirs agent-ssh-socket)
|
|
gpgconf --launch gpg-agent
|
|
```
|
|
|
|
## Copy public key
|
|
|
|
**Note** It is *not* necessary to import the corresponding GPG public key in order to use SSH.
|
|
|
|
Copy and paste the output from `ssh-add` to the server's `authorized_keys` file:
|
|
|
|
```console
|
|
$ ssh-add -L
|
|
ssh-rsa AAAAB4NzaC1yc2EAAAADAQABAAACAz[...]zreOKM+HwpkHzcy9DQcVG2Nw== cardno:000605553211
|
|
```
|
|
|
|
## (Optional) Save public key for identity file configuration
|
|
|
|
By default, SSH attempts to use all the identities available via the agent. It's often a good idea to manage exactly which keys SSH will use to connect to a server, for example to separate different roles or [to avoid being fingerprinted by untrusted ssh servers](https://blog.filippo.io/ssh-whoami-filippo-io/). To do this you'll need to use the command line argument `-i [identity_file]` or the `IdentityFile` and `IdentitiesOnly` options in `.ssh/config`.
|
|
|
|
The argument provided to `IdentityFile` is traditionally the path to the _private_ key file (for example `IdentityFile ~/.ssh/id_rsa`). For the YubiKey - indeed, in general for keys stored in an ssh agent - `IdentityFile` should point to the _public_ key file, `ssh` will select the appropriate private key from those available via the ssh agent. To prevent `ssh` from trying all keys in the agent use the `IdentitiesOnly yes` option along with one or more `-i` or `IdentityFile` options for the target host.
|
|
|
|
To reiterate, with `IdentitiesOnly yes`, `ssh` will not automatically enumerate public keys loaded into `ssh-agent` or `gpg-agent`. This means `publickey` authentication will not proceed unless explicitly named by `ssh -i [identity_file]` or in `.ssh/config` on a per-host basis.
|
|
|
|
In the case of YubiKey usage, to extract the public key from the ssh agent:
|
|
|
|
```console
|
|
$ ssh-add -L | grep "cardno:000605553211" > ~/.ssh/id_rsa_yubikey.pub
|
|
```
|
|
|
|
Then you can explicitly associate this YubiKey-stored key for used with a host, `github.com` for example, as follows:
|
|
|
|
```console
|
|
$ cat << EOF >> ~/.ssh/config
|
|
Host github.com
|
|
IdentitiesOnly yes
|
|
IdentityFile ~/.ssh/id_rsa_yubikey.pub
|
|
EOF
|
|
```
|
|
|
|
## Connect with public key authentication
|
|
|
|
```console
|
|
$ ssh git@github.com -vvv
|
|
[...]
|
|
debug2: key: cardno:000605553211 (0x1234567890),
|
|
debug1: Authentications that can continue: publickey
|
|
debug3: start over, passed a different list publickey
|
|
debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password
|
|
debug3: authmethod_lookup publickey
|
|
debug3: remaining preferred: keyboard-interactive,password
|
|
debug3: authmethod_is_enabled publickey
|
|
debug1: Next authentication method: publickey
|
|
debug1: Offering RSA public key: cardno:000605553211
|
|
debug3: send_pubkey_test
|
|
debug2: we sent a publickey packet, wait for reply
|
|
debug1: Server accepts key: pkalg ssh-rsa blen 535
|
|
debug2: input_userauth_pk_ok: fp e5:de:a5:74:b1:3e:96:9b:85:46:e7:28:53:b4:82:c3
|
|
debug3: sign_and_send_pubkey: RSA e5:de:a5:74:b1:3e:96:9b:85:46:e7:28:53:b4:82:c3
|
|
debug1: Authentication succeeded (publickey).
|
|
[...]
|
|
```
|
|
|
|
**Note** To make multiple connections or securely transfer many files, consider using the [ControlMaster](https://en.wikibooks.org/wiki/OpenSSH/Cookbook/Multiplexing) ssh option. Also see [drduh/config/ssh_config](https://github.com/drduh/config/blob/master/ssh_config).
|
|
|
|
## Touch to authenticate
|
|
|
|
**Note** This is not possible on YubiKey NEO.
|
|
|
|
By default, YubiKey will perform key operations without requiring a touch from the user. To require a touch for every SSH authentication, use the [YubiKey Manager](https://developers.yubico.com/yubikey-manager/) and Admin PIN:
|
|
|
|
```console
|
|
$ ykman openpgp touch aut on
|
|
```
|
|
|
|
To require a touch for signing and encryption operations:
|
|
|
|
```console
|
|
$ ykman openpgp touch sig on
|
|
|
|
$ ykman openpgp touch enc on
|
|
```
|
|
|
|
The YubiKey will blink when it's waiting for touch.
|
|
|
|
## Import SSH keys
|
|
|
|
If there are existing SSH keys that you wish to make available via `gpg-agent`, you'll need to import them. You should then remove the original private keys. When importing the key, `gpg-agent` uses the key's filename as the key's label; this makes it easier to follow where the key originated from. In this example, we're starting with just the YubiKey's key in place and importing `~/.ssh/id_rsa`:
|
|
|
|
```console
|
|
$ ssh-add -l
|
|
4096 SHA256:... cardno:00060123456 (RSA)
|
|
|
|
$ ssh-add ~/.ssh/id_rsa && rm ~/.ssh/id_rsa
|
|
```
|
|
|
|
When invoking `ssh-add`, it will prompt for the SSH key's passphrase if present, then the `pinentry` program will prompt and confirm for a new passphrase to use to encrypt the converted key within the GPG key store.
|
|
|
|
The migrated key should be listed in `ssh-add -l`:
|
|
|
|
```console
|
|
$ ssh-add -l
|
|
4096 SHA256:... cardno:00060123456 (RSA)
|
|
2048 SHA256:... /Users/username/.ssh/id_rsa (RSA)
|
|
```
|
|
|
|
Or to show the keys with MD5 fingerprints, as used by `gpg-connect-agent`'s `KEYINFO` and `DELETE_KEY` commands:
|
|
|
|
```console
|
|
$ ssh-add -E md5 -l
|
|
4096 MD5:... cardno:00060123456 (RSA)
|
|
2048 MD5:... /Users/username/.ssh/id_rsa (RSA)
|
|
```
|
|
|
|
When using the key `pinentry` will be invoked to request the key's passphrase. The passphrase will be cached for up to 10 minutes idle time between uses, to a maximum of 2 hours.
|
|
|
|
## Remote Machines (agent forwarding)
|
|
|
|
If you want to use YubiKey to sign a git commit on a remote machine, or ssh through another layer, then this is possible using "Agent Forwarding". This section should help you setup GPG and SSH agent forwarding.
|
|
|
|
To do this, you need to already have shell access to the remote machine, and the YubiKey setup on the host machine.
|
|
|
|
* First, on the local machine, run:
|
|
|
|
```console
|
|
$ gpgconf --list-dirs agent-extra-socket
|
|
```
|
|
|
|
This should return a path to agent-extra-socket - `/run/user/1000/gnupg/S.gpg-agent.extra` - though on older Linux distros (and macOS) it may be `/home/<user>/.gnupg/S/gpg-agent.extra`.
|
|
|
|
* Next, find the agent socket on the **remote** machine:
|
|
|
|
```console
|
|
$ gpgconf --list-dirs agent-socket
|
|
```
|
|
|
|
This should return a path such as `/run/user/1000/gnupg/S.gpg-agent`.
|
|
|
|
* On the remote machine, edit the file `/etc/ssh/sshd_config`, so that option `StreamLocalBindUnlink` is set to `StreamLocalBindUnlink yes`
|
|
|
|
* **Optional** If you do not have root access to the remote machine to edit `/etc/ssh/sshd_config`, you will need to remove the socket on the remote machine before forwarding works. For example, `rm /run/user/1000/gnupg/S.gpg-agent`. Further information can be found on the [AgentForwarding GNUPG wiki page](https://wiki.gnupg.org/AgentForwarding).
|
|
|
|
* Import public keys to the remote machine. This can be done by fetching from a keyserver. On the local machine, copy the public keyring to the remote machine:
|
|
|
|
```console
|
|
$ scp ~/.gnupg/pubring.kbx remote:~/.gnupg/
|
|
```
|
|
|
|
* Finally, to enable agent forwarding for a given machine, add the following to the local machine's ssh config file `~/.ssh/config` (your agent sockets may be different):
|
|
|
|
```
|
|
Host
|
|
Hostname remote-host.tld
|
|
ForwardAgent yes
|
|
RemoteForward /run/user/1000/gnupg/S.gpg-agent /run/user/1000/gnupg/S.gpg-agent.extra
|
|
# RemoteForward [remote socket] [local socket]
|
|
```
|
|
|
|
You should then be able to use YubiKey as if it were connected to the remote machine.
|
|
|
|
If you're still having problems, it may be necessary to edit `gpg-agent.conf` file on both the remote and local machines to add the following information:
|
|
|
|
```
|
|
enable-ssh-support
|
|
pinentry-program /usr/bin/pinentry-curses
|
|
extra-socket /run/user/1000/gnupg/S.gpg-agent.extra
|
|
```
|
|
|
|
## GitHub
|
|
|
|
You can use YubiKey to sign GitHub commits and tags. It can also be used for GitHub SSH authentication, allowing you to push, pull, and commit without a password.
|
|
|
|
Login to GitHub and upload SSH and PGP public keys in Settings.
|
|
|
|
To configure a signing key:
|
|
|
|
> git config --global user.signingkey $KEYID
|
|
|
|
Make sure the user.email option matches the email address associated with the PGP identity.
|
|
|
|
Now, to sign commits or tags simply use the `-S` option. GPG will automatically query YubiKey and prompt you for a PIN.
|
|
|
|
To authenticate:
|
|
|
|
**Windows** Run the following command:
|
|
|
|
> git config --global core.sshcommand 'plink -agent'
|
|
|
|
You can then change the repository url to `git@github.com:USERNAME/repository` and any authenticated commands will be authorized by YubiKey.
|
|
|
|
**Note** If you encounter the error `gpg: signing failed: No secret key` - run `gpg --card-status` with YubiKey plugged in and try the git command again.
|
|
|
|
## OpenBSD
|
|
|
|
`doas pkg_add pcsc-tools` and enable with `doas rcctl enable pcscd`, then reboot in order to recognize YubiKey.
|
|
|
|
## Windows
|
|
|
|
Windows can already have some virtual smartcard readers installed, like the one provided for Windows Hello. To ensure your YubiKey is the correct one used by scdaemon, you should add it to its configuration. You will need your device's full name. To find out what is your device's full name, plug your YubiKey, open the Device Manager, select "View->Show hidden devices". Go to the Software Devices list, you should see something like `Yubico YubiKey OTP+FIDO+CCID 0`. The name slightly differs according to the model. Thanks to [Scott Hanselman](https://www.hanselman.com/blog/HowToSetupSignedGitCommitsWithAYubiKeyNEOAndGPGAndKeybaseOnWindows.aspx) for sharing this information.
|
|
|
|
* Create or edit %APPDATA%/gnupg/scdaemon.conf, add `reader-port <your yubikey device's full name>`.
|
|
* In %APPDATA%/gnupg/gpg-agent.conf, add:
|
|
|
|
```
|
|
enable-ssh-support
|
|
enable-putty-support
|
|
```
|
|
|
|
* Open a command console, restart the agent:
|
|
|
|
```
|
|
> gpg-connect-agent killagent /bye
|
|
> gpg-connect-agent /bye
|
|
```
|
|
|
|
* Enter `> gpg --card-status` to see YubiKey details.
|
|
* Import the [public key](#export-public-key): `> gpg --import <path to public key file>`
|
|
* Trust it: [Trust master key](#trust-master-key)
|
|
* Retrieve the public key id: `> gpg --list-public-keys`
|
|
* Export the SSH key from GPG: `> gpg --export-ssh-key <public key id>`
|
|
|
|
Copy this key to a file for later use. It represents the public SSH key corresponding to the secret key on the YubiKey. You can upload this key to any server you wish to SSH into.
|
|
|
|
* Create a shortcut that points to `gpg-connect-agent /bye` and place it in the startup folder `shell:startup` to make sure the agent starts after a system shutdown. Modify the shortcut properties so it starts in a "Minimized" window, to avoid unnecessary noise at startup.
|
|
|
|
Now you can use PuTTY for public key SSH authentication. When the server asks for public key verification, PuTTY will forward the request to GPG, which will prompt you for a PIN and authorize the login using YubiKey.
|
|
|
|
### WSL
|
|
|
|
The goal here is to make the SSH client inside WSL work together with the Windows agent you are using (gpg-agent.exe in our case). Here is what we are going to achieve:
|
|
|
|
|
|
**Note** this works only for SSH agent forwarding. Real GPG forwarding (encryption/decryption) is actually not supported. See the [weasel-pageant](https://github.com/vuori/weasel-pageant) readme for further information.
|
|
|
|
#### Prerequisites
|
|
|
|
* Ubuntu >16.04 for WSL
|
|
* Kleopatra
|
|
* [Windows configuration](#windows)
|
|
|
|
#### WSL configuration
|
|
|
|
* Download or clone [weasel-pageant](https://github.com/vuori/weasel-pageant).
|
|
* Add `eval $(/mnt/c/<path of extraction>/weasel-pageant -r -a /tmp/S.weasel-pageant)` to shell rc file. Use a named socket here so it can be used in the RemoteForward directive of the .ssh/config file.
|
|
* Source it with `source ~/.bashrc`.
|
|
* Display the SSH key with `$ ssh-add -l`.
|
|
* Edit `~/.ssh/config` - for each host you want to use agent forwarding, add:
|
|
|
|
```
|
|
ForwardAgent yes
|
|
RemoteForward <remote ssh socket path> /tmp/S.weasel-pageant
|
|
```
|
|
|
|
**Note** The remote ssh socket path can be found by executing `$ gpgconf --list-dirs agent-ssh-socket` on the host.
|
|
|
|
#### Remote host configuration
|
|
|
|
Add the following to the shell rc file:
|
|
|
|
```
|
|
export SSH_AUTH_SOCK=$(gpgconf --list-dirs agent-ssh-socket)
|
|
export GPG_TTY=$(tty)
|
|
```
|
|
|
|
Add the following to `/etc/ssh/sshd_config`:
|
|
|
|
```
|
|
AllowAgentForwarding yes
|
|
StreamLocalBindUnlink yes
|
|
```
|
|
|
|
And reload the SSH daemon (e.g., `sudo service sshd reload`).
|
|
|
|
#### Final test
|
|
|
|
- Unplug YubiKey, disconnect or reboot.
|
|
- Log back in to Windows, open a WSL console and enter `ssh-add -l` - you should see nothing.
|
|
- Plug in YubiKey, enter the same command to display the ssh key.
|
|
- Log in to the remote host, you should have the pinentry dialog asking for the YubiKey pin.
|
|
- On the remote host, type `ssh-add -l` - if you see the ssh key, that means forwarding works!
|
|
|
|
**Note** Agent forwarding may be chained through multiple hosts - just follow the same [protocol](#remote-host-configuration) to configure each host.
|
|
|
|
# Troubleshooting
|
|
|
|
- If you don't understand some option - read `man gpg`.
|
|
|
|
- If you encounter problems connecting to YubiKey with GPG - try unplugging and re-inserting YubiKey, and restarting the `gpg-agent` process.
|
|
|
|
- If you receive the error, `gpg: decryption failed: secret key not available` - you likely need to install GnuPG version 2.x.
|
|
|
|
- If you receive the error, `Yubikey core error: no yubikey present` - make sure the YubiKey is inserted correctly. It should blink once when plugged in.
|
|
|
|
- If you still receive the error, `Yubikey core error: no yubikey present` - you likely need to install newer versions of yubikey-personalize as outlined in [Required software](#required-software).
|
|
|
|
- If you receive the error, `Yubikey core error: write error` - YubiKey is likely locked. Install and run yubikey-personalization-gui to unlock it.
|
|
|
|
- If you receive the error, `Key does not match the card's capability` - you likely need to use 2048 bit RSA key sizes.
|
|
|
|
- If ssh authentication fails - add up to 3 `-v` flags to increase verbosity.
|
|
|
|
- If you receive the error, `sign_and_send_pubkey: signing failed: agent refused operation` - make sure you replaced `ssh-agent` with `gpg-agent` as noted above.
|
|
|
|
- If you still receive the error, `sign_and_send_pubkey: signing failed: agent refused operation` - [run the command](https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=835394) `gpg-connect-agent updatestartuptty /bye`
|
|
|
|
- If you still receive the error, `sign_and_send_pubkey: signing failed: agent refused operation` - check `~/.gnupg/gpg-agent.conf` to make sure the path to `pinentry` is correct.
|
|
|
|
- If you receive the error, `Error connecting to agent: No such file or directory` from `ssh-add -L`, the UNIX file socket that the agent uses for communication with other processes may not be set up correctly. On Debian, try `export SSH_AUTH_SOCK="/run/user/$UID/gnupg/S.gpg-agent.ssh"`
|
|
|
|
- If you receive the error, `Permission denied (publickey)`, increase ssh verbosity with the `-v` flag and ensure the public key from the card is being offered: `Offering public key: RSA SHA256:abcdefg... cardno:00060123456`. If it is, ensure you are connecting as the right user on the target system, rather than as the user on the local system. Otherwise, be sure `IdentitiesOnly` is not [enabled](https://github.com/FiloSottile/whosthere#how-do-i-stop-it) for this host.
|
|
|
|
- If you totally screw up, you can [reset the card](https://developers.yubico.com/ykneo-openpgp/ResetApplet.html).
|
|
|
|
# Notes
|
|
|
|
1. YubiKey has two configurations: one invoked with a short press, and the other with a long press. By default, the short-press mode is configured for HID OTP - a brief touch will emit an OTP string starting with `cccccccc`. If you rarely use the OTP mode, you can swap it to the second configuration via the YubiKey Personalization tool. If you *never* use OTP, you can disable it entirely using the [YubiKey Manager](https://developers.yubico.com/yubikey-manager) application (note, this not the similarly named YubiKey NEO Manager).
|
|
1. Programming YubiKey for GPG keys still lets you use its two configurations - [OTP](https://www.yubico.com/faq/what-is-a-one-time-password-otp/) and [static password](https://www.yubico.com/products/services-software/personalization-tools/static-password/) modes, for example.
|
|
1. Setting an expiry essentially forces you to manage your subkeys and announces to the rest of the world that you are doing so. Setting an expiry on a primary key is ineffective for protecting the key from loss - whoever has the primary key can simply extend its expiry period. Revocation certificates are [better suited](https://security.stackexchange.com/questions/14718/does-openpgp-key-expiration-add-to-security/79386#79386) for this purpose. It may be appropriate for your use case to set expiry dates on subkeys.
|
|
1. To switch between two or more identities on different keys - unplug the first key and restart gpg-agent, ssh-agent and pinentry with `pkill gpg-agent ; pkill ssh-agent ; pkill pinentry ; eval $(gpg-agent --daemon --enable-ssh-support)`, then plug in the other key and run `gpg-connect-agent updatestartuptty /bye` - then it should be ready for use.
|
|
|
|
# Links
|
|
|
|
* https://alexcabal.com/creating-the-perfect-gpg-keypair/
|
|
* https://blog.habets.se/2013/02/GPG-and-SSH-with-Yubikey-NEO
|
|
* https://blog.josefsson.org/2014/06/23/offline-gnupg-master-key-and-subkeys-on-yubikey-neo-smartcard/
|
|
* https://developers.yubico.com/PGP/Card_edit.html
|
|
* https://developers.yubico.com/PIV/Introduction/Admin_access.html
|
|
* https://developers.yubico.com/yubico-piv-tool/YubiKey_PIV_introduction.html
|
|
* https://developers.yubico.com/yubikey-personalization/
|
|
* https://developers.yubico.com/yubikey-piv-manager/PIN_and_Management_Key.html
|
|
* https://evilmartians.com/chronicles/stick-with-security-yubikey-ssh-gnupg-macos
|
|
* https://gist.github.com/ageis/14adc308087859e199912b4c79c4aaa4
|
|
* https://github.com/herlo/ssh-gpg-smartcard-config
|
|
* https://github.com/tomlowenthal/documentation/blob/master/gpg/smartcard-keygen.md
|
|
* https://help.riseup.net/en/security/message-security/openpgp/best-practices
|
|
* https://jclement.ca/articles/2015/gpg-smartcard/
|
|
* https://rnorth.org/gpg-and-ssh-with-yubikey-for-mac
|
|
* https://trmm.net/Yubikey
|
|
* https://www.bootc.net/archives/2013/06/09/my-perfect-gnupg-ssh-agent-setup/
|
|
* https://www.esev.com/blog/post/2015-01-pgp-ssh-key-on-yubikey-neo/
|
|
* https://www.hanselman.com/blog/HowToSetupSignedGitCommitsWithAYubiKeyNEOAndGPGAndKeybaseOnWindows.aspx
|
|
* https://www.void.gr/kargig/blog/2013/12/02/creating-a-new-gpg-key-with-subkeys/
|
|
* https://mlohr.com/gpg-agent-forwarding/
|